702260
3
Zoom out
Zoom in
Previous page
1/20
Next page
3
4
zie begrippenlijst op blz.17
centrale hiermee ook ingeschakeld worden.
Een vertraagde zone en een follower zone mogen tijdens inscha-
keling open staan. Staat er een andere zone open, dan is het
niet mogelijk de centrale in te schakelen met een sleutelscha-
kelaar.
B. Gedeeltelijk inschakelen van de centrale (HOME + ISOLATE).
2.1 Inschakelen van de HOME zones
4
.
Als de installateur een aantal zones als HOME zone heeft
geprogrammeerd dan kan er op de volgende wijze gedeeltelijk
worden ingeschakeld door de hoofdgebruiker. (Deze situatie
komt voor wanneer men b.v. 's nachts de bovenverdieping niet
beveiligd wil hebben en de beneden verdieping wel).
- Tik de vier-cijferige hoofdgebruikers code in.
- Op het display verschijnt "oP".
- Druk op de toets 9 (HOME).
ALLEEN DE HOME ZONES VAN DE CENTRALE ZIJN NU INGESCHAKELD.
HOME zones: Als een zone als HOME zone geprogrammeerd is dan
is deze zone in de homestand aktief. Alle overige zones kunnen
dus bij inschakeling in de HOME stand geen alarm veroorzaken.
Dit geldt ook voor de 24-uurs zones. Als een 24-uurs zone in
de HOME stand aktief moet zijn, dan moet deze dus ook als HOME
zone geprogrammeerd worden!
Standaard zijn alle zones als HOME zone geprogrammeerd.
2.2 Isoleren van zones (ISOLATE).
Wanneer van tevoren opgegeven moet worden, welke zones bij het
inschakelen overbrugd moeten worden, kan de hoofdgebruiker de
desbetreffende zones isoleren. Dit vindt in de praktijk bij-
voorbeeld plaats, wanneer bij een klasse-avond een deel van
het schoolgebouw wel toegankelijk moet zijn, terwijl in het
andere deel de beveiliging op scherp moet staan. Nadat de
centrale weer uitgeschakeld is, is de isolatie automatisch
opgeheven.
- Tik de vier-cijferige hoofdgebruikers code in.
- Op het display verschijnt "oP".
- Druk op de toets 0 (ISOLATE).
Op het display verschijnt "iS".
Elke zone, waarvan de LED bij de bijbehorende toets gaat
branden is overbrugd. Is de LED uit, dan is de zone dus
niet overbrugd.
- Druk op de zonetoets om een zone te overbruggen (de LED
gaat aan) of nogmaals om de overbrugging op te heffen.
(de LED gaat uit).
- Druk op de toets * om het programma te verlaten.
Opm.: Als de centrale na het inschakelen weer uitgeschakeld
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alphatronics CP-407DL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alphatronics CP-407DL in the language / languages: Dutch as an attachment in your email.

The manual is 0,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alphatronics CP-407DL

Alphatronics CP-407DL User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info