560044
5
Zoom out
Zoom in
Previous page
1/16
Next page
61
If this appliance which features magnetic door seals is to replace an older appliance
having a spring-lock on the door or lid, ensure that the spring lock is unusable
before discarding the old appliance.
This will prevent it from becoming a death-trap for a child.
Installation
Location
Place the appliance as far away as possible from sources of heat, e.g. radiators, heaters,
direct sunlight, etc.
Best results are achieved with a room temperature ranging from +18°C to +38°C for class
«ST» appliances or from +18°C and +43°C for class «T» appliances. The class of your
appliance is indicated on the rating plate.
Electrical connection
Before plugging in the appliance to the mains socket, check that the voltage and fre-
quency indicated on the appliance’s rating plate are the same as those provided by your
home power supply.
A 6% fluctuation above or below the rated voltage is acceptable.
For operation using different voltages you should use an autotransformer of a suitable
capacity.
The appliance MUST be connected to an efficient earth or ground tap.
The supply-lead plug in fact incorporates a special earth or ground contact for this pur-
pose.
If by any chance the sockets of your domestic wiring system are not earthed, the appli-
ance must be connected to a separate earth or ground wire by a qualified electrician, in
accordance with existing safety regulations.
The manufacturer declines to accept any liability if this accident-prevention proce-
dure is not followed.
This appliance complies with EEC Directive no. 87/308, dated 2.6.87, concerning the sup-
pression of radio interference.
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifi-
cations.
Cleaning the appliance’s interior
Before using the appliance for the first time, wash all internal parts with lukewarm water
and neutral soap so as to remove the typical «new» smell and then dry thoroughly. Do not
use detergents or abrasive powders as these will damage the finish.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alno AKE8130IW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alno AKE8130IW in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alno AKE8130IW

Alno AKE8130IW User Manual - German - 17 pages

Alno AKE8130IW User Manual - Dutch - 16 pages

Alno AKE8130IW User Manual - French - 16 pages

Alno AKE8130IW User Manual - Italian - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info