541372
30
Zoom out
Zoom in
Previous page
1/36
Next page
Allen & Heath 30 ZED-4 BUS User Guide
Next, fire up SONAR LE.
Click Options/Audio and click on the Drivers tab.
The Input drivers are the audio sources to the
computer, here we have enabled the USB Audio Device
which is the ZED mixing console USB device, and
disabled the audio from the soundcard in the pc.
So the computer is set up to receive audio from
ZED.
The Output Drivers are the audio outputs from the
computer. Here you can see that the pc soundcard
has 4 stereo outputs (all disabled) and the software
has located the USB Audio Device which is ZED.
Tick to enable it.
You will now be able to select your ZED USB left &
right outputs as inputs to SONAR LE and be able to
send audio to your ZED from SONAR outputs.
In order to show how to select inputs to SONAR
tracks, here is a basic Cakewalk project (.cwp).
This is created by clicking File/New/Normal and
then inserting a second audio track by clicking
Insert/Audio Track from the main toolbar.
Click on the I/O tab near the bottom of the window,
then click the expand buttons in the audio track
panes. The tracks 1 & 2 have been re-named ZED
Left and ZED Right by double clicking the name field.
Click the I and the O fields to select inputs and out-
puts for the track. Here we have selected the USB
Left signal to go to Track 1 (ZED Left) and the USB
Right signal to go to track 2 (ZED Right), panned
them accordingly and selected the track outputs to
be the Master Bus.
If audio is present, click the Input Echo buttons (lit
up yellow here) to monitor the signals on the Mas-
ter Bus.
The output for the Master Bus is displayed in the
field marked “O” in the Master Bus pane below the
input tracks. You can see here it says USB Audio
Device, which is the ZED USB input.
SONAR will configure this automatically if there is
only one output device enabled in the Output Driv-
ers Options window (above).
You should now be able to send audio to and from your ZED mixing console using SONAR LE.
To test this, let’s do a recording….
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ZED436 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ZED436 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info