541378

Allen-Heath MixWizard Series WZ20S Manual

5
Zoom out
Zoom in
Previous page
1/32
Next page
WZ20S User Guide 5
Introduction
ALLEN & HEATH continues its commitment to provide high quality audio mixing
equipment engineered to meet the exacting requirements of today’s audio business. The
WZ20S compact stereo mixing console brings you the latest in high performance
technology and offers the reassurance of over two decades of console manufacture and
customer support.
This user guide presents a quick reference to the function and application of the WZ20S.
We recommend that you read this fully before starting. Included is information on
installing, connecting and operating the console, panel drawings and technical
specification. A system block diagram is printed on the rear cover. For further information
on the basic principles of audio system engineering, please refer to one of the specialist
publications available from bookshops and audio equipment dealers.
Whilst we believe the information in this guide to be reliable we do not assume
responsibility for inaccuracies. We also reserve the right to make changes in the interest
of further product development.
Service And Technical Support
We are able to offer further product support through our world-wide network of approved
dealers and service agents. You can also access our Web site on the Internet for
information on our product range, assistance with your technical queries or simply to chat
about matters audio. To help us provide the most efficient service please keep a record of
your console serial number, and date and place of purchase to be quoted in any
communication regarding this product. The serial number is located on the connector
panel. A space is provided here for you to note this.
Console SERIAL NUMBER Date of purchase Place of purchase
Looking After Your Console
Your WZ20S is ruggedly constructed and should provide many years of reliable service
whether installed, location mixing or live gigging. However, you will extend the life of the
console and preserve its appearance by applying these simple common sense
precautions:
Damage : To prevent damage to the controls and cosmetics avoid placing heavy objects
on the control surface, scratching the surface with sharp objects, or rough handling and
vibration.
Environment : Protect from excessive dirt, dust, heat and vibration when operating and
storing. Avoid tobacco ash, smoke, drinks spillage, and exposure to rain and moisture. If
the console becomes wet, switch off and remove mains power immediately. Allow to dry
out thoroughly before using again.
Cleaning : Avoid the use of chemicals, abrasives or solvents. The control panel is best
cleaned with a soft brush and dry lint-free cloth. The faders, switches and potentiometers
are lubricated for life. The use of electrical lubricants on these parts is not recommended.
Transporting : The console may be transported as a free-standing unit or mounted in a
rack or flightcase. Ensure that the connector pod is secured in place with the locking
screws fitted to prevent movement. Protect the controls from damage during transit. The
faders are best positioned at the top of their travel if the console is transported without a
suitable flightcase, rack or carton. Use adequate packing if you need to ship the unit.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath MixWizard Series WZ20S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath MixWizard Series WZ20S in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info