541359
21
Zoom out
Zoom in
Previous page
1/32
Next page
iLive Fixed Format Getting Started Guide 21 AP7141 iss.5
Step 7 – Patch the sockets
The iLive features a built-in soft patchbay that lets you freely patch input and output sockets. The default
Template Shows provide a standard patch as a useful starting point. You can change this patching to suit
your application and store it in the Scene and Show memories.
View and patch channel INPUT sockets
Press SEL for an input channel and view its screen PREAMP
page (Make sure the keys next to the TouchScreen are
turned off). Use the Source Select boxes at the top of the
screen to view and change the input socket feeding the
channel. The sockets are identified by Device (Rack,
Surface or Port B), Slot (position) and Socket (number).
View and patch OUTPUT sockets
Select the TouchScreen OUTPUTS screen. Touch the tab to
select which output sockets to patch - MixRack, Surface or
Port B (if the option is fitted).
Touch Single to select and patch a signal to one output.
Touch Range to patch related signals to a range of sockets.
Touch Apply after each change.
Patching INSERTS
In most cases you do not need to insert outboard
processing. However, if required you can assign output and
input sockets as insert sends and returns for situations
where an engineer wants to use a particular device. Any
number of inserts may be assigned.
Press a channel or mix SEL key. Return to the top level
parameter screen. Touch the INSERT panel to open the
INSERT screen.
Use the drop down menus to assign the send and return
Devices. After selecting both, touch Apply. Select the
required Operating Level, typically +4dBu.
Note - Once a socket is assigned as an insert it is no longer
available for other purposes. Unassign the insert to re-use
the sockets.
Signals available to patch:
Mono/St Group
Mono/St Aux
Main mix
Mono/St Matrix
Input channel direct output
PAFL monitor L, R
MixRack inputs (mic split)
Bus out 1-32
Wedge/IEM monitor
ACE link (Port A)
Port B (network option)
Select source from the drop down menu
Select the tab to view the
sockets you wish to patch.
Touch the socket to view its
current patch or select it for
patching.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath iLive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath iLive in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info