541359
6
Zoom out
Zoom in
Previous page
1/32
Next page
iLive Fixed Format Getting Started Guide 6 AP7141 iss.5
System components
PL-6
PL-5
The MixRack is the heart of the digital audio processing
system, housing the 64x32 DSP mix engine together with
control and audio networking interfaces. The DSP can be
configured for mono/stereo and type of mix (group, aux,
mains, matrix). The system provides full dynamics, EQ and
delay processing for all inputs and masters, 8 built-in
‘RackExtra’ effects and 16 DCA groups. The 8FX returns add
to the 64 channels providing up to 72 sources to the mix. All
racks provide the full 64x32 DSP processing and differ only
in the number of Mic/Line inputs and XLR line outputs
available. The Port B option allows digital mic splitting and
system expansion from a choice of audio networking cards.
iDR-64 Biggest rack: 64 Mic/Line inputs 9U
32 XLR line outputs
iDR-48 Standard rack: 48 Mic/Line inputs 8U
24 XLR line outputs
iDR-32 Mid sized rack: 32 Mic/Line inputs 6U
16 XLR line outputs
iDR-16 Smallest rack: 16 Mic/Line inputs 3U
8 XLR line outputs
The Surface is simply a network controller for the
MixRack. It has a built-in interface for local audio
which is transported to and from the MixRack via the
ACE connection along with the Ethernet control. Each
bank of faders has 4 or 6 layers providing a total of 72,
80 or 112 control strips depending on Surface size.
These strips are freely assignable as inputs, mix
masters or DCAs in any combination. The Surfaces
offer the same control, the difference being a reduced
rotary control section for the smaller models. All
processing is available using the TouchScreen.
iLive-T112 Biggest surface:
28 faders, 4 layers = 112 strips
16 local line in = 8 TRS, 4 RCA, 2 SPDIF
14 local out = 8 TRS, 2 RCA, 1 SPDIF, Monitor
iLive-T80 Mid sized surface:
20 faders, 4 layers = 80 strips
8 local line in = 4 TRS, 2 RCA, 1 SPDIF
10 local out = 4 TRS, 2 RCA, 1 SPDIF, Monitor
iLive-R72 Smallest surface:
12 faders, 6 layers = 72 strips
8 local line in = 4 TRS, 2 RCA, 1 SPDIF
10 local out = 4 TRS, 2 RCA, 1 SPDIF, Monitor
PL Series controllers A range of remote controllers
is available with assignable switches, LEDs, encoders
and faders. A PL-8 4in/4out GPIO controller is also
available. These connect to the MixRack via the PL-
Anet serial port using CAT5 cable and can be
configured using the Surface or laptop. The PL-9 hub
is allows star point instead of daisy chain connection.
More information on the PL Series is available on the
Allen & Heath web site.
PL-3 PL-4
PL-9
Hub
PL-10
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath iLive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath iLive in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info