541362

Allen-Heath GL 2400 Manual

28
Zoom out
Zoom in
Previous page
1/40
Next page
28 GL2400 User Guide
Applications for the Matrix The matrix is a ‘mixer within a
mixer’, a versatile toolbox of outputs you can use to satisfy a host of
applications. Each of the 4 outputs is mixed from any combination of
the groups, L, R and an external input as dialled up on the 7 source
rotaries (hence a ‘7x4’ matrix). Its master level can be adjusted
independently. Using combinations of the outputs you can create
mono, stereo or multiple output mixes. Some applications include:
Mono Recording If you are working with a stereo PA you can
combine L and R into a matrix output to produce a mono mix feeding
a recorder, video camera and so on. Raise the L and R rotaries to the
2 o’clock position to sum them together. You can use the built-in
1kHz tone generator to feed a line-up tone to the connected recorder.
Stereo Recording Raise L to the unity 3 o’clock position in one
matrix, R in another to create a stereo pair that follows the LR mix.
You can adjust the balance to compensate for the acoustic sound in
the room using the groups, and even add audience ambience
(described later).
Remote Broadcast Create a mono or stereo feed as described
above. Use the tone generator to send a ‘slate’ signal to the
destination for line-up. You can check your level in the headphones
before you send it by muting the matrix and selecting AFL.
Zone Feeds Send independent relay feeds to additional locations
such as the foyer, dressing rooms, cry room, balcony and so on. You
can use the groups to adjust the balance to suit the destination, for
example to boost the orchestra against the vocals. Feed the output
through an EQ to tune the speaker for the local acoustics.
Delay Fill Speakers Use the matrix to feed additional fill speakers for
distributing the sound more evenly around a large venue, for example
centre fill, stage front fills, under balcony or rear fills, or ‘mix island’
delay tower at a festival. To aid intelligibility for the nearby listeners
without moving their focus from the stage, the send should be delayed
using an in-line delay processor. As a rule of thumb, delay 1mS per
foot difference between the listener and the fill and the listener and the
main speakers. Now add a few milliseconds ‘Haas effect’ delay so the
listener hears the main speakers slightly before the fill. Keep the fill
level about 10dB or so below the main PA sound at that location. It
may help intelligibility to boost the vocals above the instruments in the
fills, and to use an EQ to cut the extreme LF and HF frequencies.
Hearing Assist It is a growing requirement that venues provide a
hard-of-hearing inductive loop, IR or wireless broadcast for the hearing
impaired audience. The matrix is ideal for this application as you can
combine a stereo LR mix into mono, add groups to help vocal
intelligibility, patch in an external ambience source, and add
processing such as EQ and limiters which may be needed.
Additional Monitor Mixes You could use the matrix to create some
additional monitor mixes when you run out of auxes, this time made
up from a mix of the groups, LR and external input. The LR could be
used to create a general overall balance, and then the groups added
according to musician preference. Groups could be routed from 'me
only' channels associated with each musician, or traditionally grouped
sources. The musician could get a balance from, say, the overall
stereo mix, drums, brass, keyboards, ‘me only’ and ambience, a very
quick way of mixing. You could also use the EXT IN to add ambience
pickup, very useful if you are creating in-ear (IEM) mixes. Use two
matrices to create stereo monitor feeds.
Combining Two Consoles into a Single PA In a festival situation
you may have a support band wishing to patch in their own console.
One way to do this is to feed the PA from a pair of matrices, and then
use EXT Inputs to combine the external console with the main LR mix.
AFL AFL
OO
LEVEL
OO
R
OO
L
OO
O
LEVEL
O
MUTE
+6
+6
MUTE
O +6
O +6
O
O+6
R
+6
L
O +6
O +6
2
3
GRP
4
OO
GRP
OO
1
GRP
OO
GRP
2
O
O
3
+6
4
GRP
+6
GRP
O +6
O +6
O
1
+6
GRP
GRP
O +6
OO
EXT
O+6
EXT
O +6
IN IN
O
LEVEL
OO +6
O +6
O
O
R
L
O +6
O +6
2
O
O
3
4
GRP
GRP
O +6
O +6
O
1
GRP
GRP
O +6
O
EXT
O +6
IN
O
LEVEL
OO +6
O +6
O
O
R
L
O +6
O +6
2
O
O
3
4
GRP
GRP
O +6
O +6
O
1
GRP
GRP
O +6
O
EXT
O +6
IN
AFL
MUTE
AFL
MUTE
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 2400 in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info