693705

Alesis MULTIMIX 8 USB FX Manual

3
Zoom out
Zoom in
Previous page
1/24
Next page
3
AUDIO SETUP
The MULTIMIX 8 USB FX is a class-compliant device that can be used with
virtually any digital audio workstation or recording software that supports USB
audio. If you want to use the included software, insert the CD into your
computer and follow the on-screen instructions.
To enable your MULTIMIX 8 USB FX to send and receive audio to and from
your computer, follow the instructions below for your computer's operating
system:
WINDOWS 7:
1. Use the included cable to connect the MULTIMIX 8 USB FX to your
computer.
2. Go to Start Menu Control Panel Hardware and Sound Sound.
3. Click the Playback tab and select USB Audio Codec* as the default
device.
4. Click the Recording tab and select USB Audio Codec* as the default
device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-channel, 16-bit,
44100 Hz (CD Quality) as the default format.
7. Uncheck both boxes under Exclusive Mode.
8. Click the Levels tab and set the slider to "4."
9. Click OK to close the Properties window.
10. Click OK to close the Sound control panel.
WINDOWS VISTA:
1. Use the included cable to connect the MULTIMIX 8 USB FX to your
computer.
2. Go to Start Menu Control Panel Sound. (If you don't see Sound, select Switch to Classic View, and the Sound
Control Panel should become available.)
3. Click the Playback tab and select USB Audio Codec* as the default device.
4. Click the Recording tab and select USB Audio Codec* as the default device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-channel, 16-bit, 44100 Hz (CD Quality) as the default format.
7. Uncheck both boxes under Exclusive Mode.
8. Click OK to close the Properties window.
9. Click OK to close the Sound control panel.
WINDOWS XP:
1. Use the included cable to connect the MULTIMIX 8 USB FX to your computer.
2. Go to Start Menu Control Panel Sounds and Audio Devices.
3. Click the Audio tab.
4. Under Sound Playback and Sound Recording, select USB Audio Codec* as the default device.
5. Click OK.
MAC:
1. Use the included cable to connect the MULTIMIX 8 USB FX to your computer.
2. Go to Applications Utilities Audio MIDI Setup.
3. In the Audio Devices tab under System Settings, select USB Audio Codec* as your Default Input and Default
Output.
4. Close the window.
REAR PANEL FEATURES
1. POWER IN – Use the
included power adapter
to connect the
MULTIMIX 8 USB FX to
a power outlet. While
the power is switched
off, plug the power
supply into the MULTIMIX 8 USB FX first, then plug the power supply into a power outlet.
2. POWER SWITCH – Turns the MULTIMIX 8 USB FX on and off. Turn on the MULTIMIX 8 USB FX after all input devices
have been connected and before you turn on amplifiers. Turn off amplifiers before you turn off the MULTIMIX 8 USB
FX.
3. PHANTOM POWER – This switch activates and deactivates phantom power. When activated, phantom power supplies
+48V to the XLR mic inputs. Please note that most dynamic microphones do not require phantom power, while most
condenser microphones do. Consult your microphone’s documentation to find out whether it needs phantom power.
4. USB PORT – Use the included cable to connect the MULTIMIX 8 USB FX to a computer. MULTIMIX 8 USB FX requires
a USB 1.1 or higher (e.g. USB 2.0) connection.
Be sure your audio software program is
set up to receive audio via the
MULTIMIX 8 USB FX. This can usually
be done in your software's
"Preferences" or "Device Setup."
Please consult your software manual
for more information.
* If you have other USB audio devices
connected to your computer, which may
have identical names, you may need to
try selecting each one until the
MULTIMIX 8 USB FX is recognized.
If you experience too m
u
ch latency
after adjusting your software latency
settings, we recommend the free
ASIO4ALL (Audio Stream Input/Output)
driver for PC at www.asio4all.com.
ASIO drivers generally perform better
and with lower latency since they create
a more efficient communication
between audio devices and software.
12 3
4
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis MULTIMIX 8 USB FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis MULTIMIX 8 USB FX in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info