693706

Alesis MultiMix 4 USB FX Manual

3
Zoom out
Zoom in
Previous page
1/24
Next page
3
WINDOWS 8:
1. Use the included cable to connect the MultiMix 4 USB FX to
your computer.
2. From the Start menu, click the lower-left corner of the
screen to bring yourself to the Desktop.
3. In the bottom-right corner of the Taskbar, locate the Volume
Control "Speaker" icon.
4. Right-click the speaker and select Playback Devices. The
Windows Sound control panel should appear set on the
Playback tab.
5. If your computer’s soundcard does not have a green "check
mark" symbol next to it, right-click it and select "Set as
Default Device".
WINDOWS 7:
1. Use the included cable to connect the MultiMix 4 USB FX to
your computer.
2. Go to Start Menu Control Panel Hardware and
Sound Sound.
3. Click the Playback tab and select USB Audio Codec* as
the default device.
4. Click the Recording tab and select USB Audio Codec* as
the default device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-
channel, 16-bit, 44100 Hz (CD Quality) as the default
format.
7. Uncheck both boxes under Exclusive Mode.
8. Click the Levels tab and set the slider to "4."
9. Click OK to close the Properties window.
10. Click OK to close the Sound control panel.
WINDOWS VISTA:
1. Use the included cable to connect the MultiMix 4 USB FX to your computer.
2. Go to Start Menu Control Panel Sound. (If you do not see Sound, select Switch to Classic View, and
the Sound Control Panel should become available.)
3. Click the Playback tab and select USB Audio Codec* as the default device.
4. Click the Recording tab and select USB Audio Codec* as the default device.
5. Click Properties in the lower right-hand corner.
6. In the new window, click the Advanced tab and select 2-channel, 16-bit, 44100 Hz (CD Quality) as the
default format.
7. Uncheck both boxes under Exclusive Mode.
8. Click OK to close the Properties window.
9. Click OK to close the Sound control panel.
WINDOWS XP:
1. Use the included cable to connect the MultiMix 4 USB FX to your computer.
2. Go to Start Menu Control Panel Sounds and Audio Devices.
3. Click the Audio tab.
4. Under Sound Playback and Sound Recording, select USB Audio Codec* as the default device.
5. Click OK.
MAC OS X:
1. Use the included cable to connect the MultiMix 4 USB FX to your computer.
2. Go to your Applications directory and open System Preferences.
3. Click the Sound icon.
4. In the Input and Output tabs select USB Audio Codec.
5. Close the window.
*If you have other USB audio devices
connected to your computer, which may
have identical names, you may need to try
selecting each one until the MultiMix 4 USB
FX is recognized.
If you experience too much latency after
adjusting your software latency settings, we
recommend the free ASIO4ALL (Audio
Stream Input/Output) driver for PC at
asio4all.com. ASIO drivers generally
perform better and with lower latency since
they create a more efficient communication
between audio devices and software.
Be sure your audio software program is set
up to receive audio via the MultiMix 4 USB
FX. This can usually be done in your
software's "Preferences" or "Device Setup."
Please consult your software manual for
more information.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis MultiMix 4 USB FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis MultiMix 4 USB FX in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info