693656
30
Zoom out
Zoom in
Previous page
1/32
Next page
28
ingressi RCA “phono” (sul retro dell’apparecchio) e
posizionare questo interruttore.
10. Phantom Power – Questi interruttori permettono di fornire
+48v “Phantom Power” a microfoni a condensatore che
richiedono alimentazione. Ogni tasto attiva/disattiva
l’alimentazione phantom power per una coppia di ingressi
(cioè: canali 1-2, 3-4, 5-6, e 7-8).
Panoramica pannello posteriore
1. Uscite cuffie – Collegare le cuffie a queste uscite. La prima
uscita cuffie rispecchia sempre la coppia di uscita analogica
1/2. La seconda uscita cuffie è assegnabile in software.
2. Uscite Main (8 uscite sull’IO|26; 2 uscite sull’IO|14)
Servirsi di cavi da ¼,” “TRS” per collegare queste uscite agli
ingressi bilanciati degli altoparlanti o dell’amplificatore.
L’IO|26 (illustrato sopra) è dotato di 8 uscite. L’IO|14 ha 2
uscite. Se si utilizza l’IO|26 e si desidera collegare ulteriori
altoparlanti, amplificatori cuffie o processori hardware,
collegarli alle uscite da 3 a 8.
3. Ingresso Phono (solo IO|26) – Collegare il giradischi a
questo ingresso.
Se il giradischi ha un cavo per la messa a terra, collegarlo alla
vite di terra che si trova alla destra degli ingressi phono.
Questa messa a terra minimizzerà il brusio e il rumore di
fondo.
4. Ingressi ADAT Lightpipe – Servirsi di cavi ottici
compatibili con ADAT per il collegamento a questi
ingressi.
5. Connettori S/PDIF – Collegare dispositivi digitali
abilitati S/PDIF servendosi di cavi coassiali a terminazione
RCA.
6. Connettori MIDI – Collegare tastiere, moduli sonori o altri
dispositivi MIDI servendosi di cavi MIDI a 5 poli.
7. Connettori FireWire – Collegare una di queste spine alla
porta FireWire del computer. Si può utilizzare l’altro jack per
L’alimentazione Phantom è
necessaria unicamente per
microfoni a condensatore. I
microfoni dinamici non
richiedono alimentazione.
Controllare il manuale del
microfono per verificare se
necessita di alimentazione
phantom.
Le uscite dell’IO|14/26 sono
a “impedenza bilanciata”.
Questo metodo di
collegamento fornisce tutti i
benefici di un cablaggio
“pienamente bilanciato”
quando le uscite sono
collegate al dispositivo
bilanciato. Inoltre, il
bilanciamento
dell’impedenza, a differenza
di altri metodi di
bilanciamento,permette un
collegamento senza problemi
a dispositivi non bilanciati.
Collegando un dispositivo di
ingresso ADAT o S/PDIF (o
entrambi), bisognerà
selezionarne uno come
“clock master” nel pannello
di controllo dell’IO.
Il dispositivo impostato come
clock master determina la
gamma oraria dell’IO e sarà
responsabile di mantenere
tutti i segnali digitali
sincronizzati.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alesis IO26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alesis IO26 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alesis IO26

Alesis IO26 User Manual - English - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info