707374
56
Zoom out
Zoom in
Previous page
1/58
Next page
56
9. CALIBRATION
9.1 General:
If the weather station shows deviating values, it’s possible to calibrate the values. To correctly calibrate
the weather station, you’ll need an accurate reference showing the correct value. If you have no reference
available, it’s of no use to calibrate the weather station.
9.2 To calibrate:
In the normal mode, press the “TUNE” button. CALL appears in the display and IN starts ashing, press the
TUNE” button again. The indoor temperature starts ashing with 0. Use the / buttons to adjust
the temperature display. For example 1.0 to indicate the indoor temperature with 1 degree higher. Press
TUNE” again to continue with the humidity indoors.
If “IN” ashes, it’s possible to use the / buttons to continue with “OUT”, OUT 1, OUT2 and
OUT3. At the correct option, press “TUNE” to adjust the outdoor temperature, humidity or wind speed. For
the wind speed the icon starts ashing. While ashing, press the / buttons to set.
Press and hold the “TUNE” button a little longer to return to the normal display mode.
9.3 Osetsettings:
Temperature: Displayed value (e.g. 25.2 ºC) + oset value e.g. 2.1 = calibrated value 27.3 ºC
Humidity: display value (e.g. 55%) + oset value e.g. 5 = calibrated value 60%
Wind speed: display value (e.g. 10.5km/h) x oset value e.g. 1,2 = calibrated value 12.6km/u
10. PROBLEMS AND SOLUTIONS
Problems Solutions
No or strange measurement values of the outdoor temperature
and/or humidity.
Check whether the air slots of the outdoor unit are open.
Check the outdoor unit housing.
No or strange measurement values of the wind speed. Check the wind cups of the wind speed meter.
and
---
(receptionsignal lost for 15 minutes)
Move the indoor unit closer to the outdoor unit.
Make sure the indoor unit is not placed near other electronic
devices that may cause interference due to wireless communi-
cation. (TVs, PCs, microwaves)
If the problems remain, reset both the indoor and outdoor unit.
and
Er
(reception signal lost for 1 hour)
11. MAINTENANCE
11.1 Outdoor temperature and humidity sensor:
1. Blow into the holder that houses the temperature and humidity sensor until clean.
2. Use a long-haired soft brush to clean the wind deectors and sun shields.
3. DON’T use WATER.
12. SPECIFICATIONS
Indoor unit:
Dimensions 155 x 95 x 23mm
Weight 265g (excluding batteries)
Power supply 2 x 1.5V AA battery
Frequency 868MHz
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto WS-3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto WS-3400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 21,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info