458285

Alecto DVM 70 Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
6
7
Positioning tips
• When using the unit as a baby monitor: position the camera unit at a minimum distance of
2 metres from your baby and make sure that the power cable is safely tucked away.
• The temperature sensor projects out from the back of the camera unit. Make sure that the
sensor is hanging freely, is not in direct sunlight and is not heated by light bulbs.
• To ensure an optimum range, it is best to position the camera unit as high as possible,
away from large metal surfaces.
• The camera is not waterproof and is therefore only suitable for indoor use. If used out-
doors, the camera unit must be protected from moisture and sand.
3.2 MONITOR UNIT:
Power supply:
The monitor unit may be powered directly by the supplied rechargeable battery or via the sup-
plied mains adapter with the small plug. As soon as you connect the mains adapter, the battery
will be charged, so that you can also use the monitor unit in a mobile manner.
Battery:
1. Open the battery compartment of the monitor unit by sliding off the battery cover on the
back of the monitor unit.
2. Insert the supplied batteries in the battery compartment in such a way that the metal con-
tacts of the battery come into contact with the terminals of the monitor unit, and push the
battery downwards slightly until it clicks into place.
3. Slide the battery cover back on to the monitor unit.
Only use the supplied Li-Polymer battery (3.7V, 950mAh).
Mains adapter:
1. Connect the 6V mains adapter with the small plug to the 6V DC jack on the right-hand
side of the camera unit.
2. Plug the mains adapter into a 230V socket.
Only use the supplied mains adapter with the small plug,
MOSO MSP-C0800IC6.0-5W-DE or HONR ADS-5Q-06 06005GPG or
TEN PAO INTERNATIONAL LTD, model nummer S006MV0600080.
(6VDC, 800mA, )
Charging:
As soon as you connect the monitor unit to the mains adapter and plug the
adapter into a 230V wall socket, the battery will be charged.
• The lamp lights up. This lamp lights up when and for as long as the bat-
tery is being charged, and turns off when the battery is full.
• If the monitor unit is turned on and you have images, you will see the bat-
tery status in the top right of the screen. This battery symbol is animated
while the battery is being charged. When the symbol remains completely green, the bat-
tery is fully charged. When this symbol is red, the battery is almost empty.
if, instead of the symbol of a battery, the symbol of a 230 V plug lights up, the battery
has not been inserted; in this case, the lamp is only an on/off indicator: illuminated
when the monitor unit is on, off when the monitor unit is off
• Beforeusingtheunitforthersttime,youshouldchargethebatteryforatleast15hours,
even if the indicator shows that the battery is full.
• The charging circuit for the battery is controlled electronically; there is no danger of
overloading, so you can leave the mains adapter continuously connected. In the event
that you will not be using the unit for an extended period of time, it is recommended that
you should remove the mains adapter from the wall socket. When you start using the unit
again,besuretorstchargethebatterywell.
Automatic night vision:
• The camera unit includes 8 built-in infrared LEDs; these LEDs are automatically switched
on when it becomes dark around the camera unit, and automatically switched off when it
becomes light.
• These LEDs can illuminate objects up to a distance of approximately 2 metres.
• Please note that in the darkness, i.e. when the night vision LEDs are switched on, the im-
age on the monitor will appear in black and white.
Please note: Infrared light cannot be perceived by the human eye; this means that
you cannot see that these LEDs are on with the naked eye. Depending on the type of
infrared LED, a red glow may, however, be visible.
Outdoor use:
• The monitor is not waterproof and is therefore only suitable for indoor use. If used out-
doors, this monitor unit must be protected from moisture and sand.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVM 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM 70 in the language / languages: English as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto DVM 70

Alecto DVM 70 User Manual - Dutch - 20 pages

Alecto DVM 70 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info