INST
Power supply:
The baby unit (camera) is powered by the
included 5V power adaptor with the straight
(micro USB) plug.
Make sure that the baby can’t touch the wire of the baby unit
or the adaptor cord. Place the
baby unit at least 1-1.5 meters
away from the baby and bundle
excess cable lengths using tape or
this purpose.
The parent unit (monitor) is powered by the
permanently installed and non-exchangeable
battery
ing the supplied 5V power adaptor with the
perpendicular (micro USB) plug to the rear of
the parent unit.
Insert the power adaptors into a 230V wall outlet.
Only use the supplied power adaptors with the
The specications of both adaptors are identical. That’s
why it won’t cause any problems when accidentally
interchanging the adaptors.
SCREEN SYMBOL
Signal strength:
strong reception
good reception
average reception
poor reception
no reception
Sound:
sound is enabled
Attention, this doesn’t indicate the set volume
X sound is disabled (volume set to 0)
Attention, when disabling the sound while the VOX
function is active (for this, see ‘menu operated
functions’), the speaker symbol will keep indicating that
the sound is enabled
Lullabies
Feeding timer:
in the lower right corner of the screen
T
the temperature alert is enabled
T
(‘22’
Indicates the temperature in the room where the baby unit
is situated; take into account a possible tolerance of ± 1.5
degrees
23:07:25 (‘23:07:25’
The time is displayed in the upper right corner of the screen.
Battery:
battery full
alert tones will sound for approximately 20 to 30 minutes.
Zoom function:
USE
BABY
Switching on/o:
button at the front of the baby unit to
switch on the baby unit. The indicator directly underneath the
button again to
The baby unit switches on automatically when connecting the
power adaptor
then completely to the right and then fully down and up. Final-
The arrow buttons on the parent unit allow you to aim the
camera at the desired spot.
Automatic night vision:
dark and will switch of again when it becomes light.
The LEDs can illuminate objects up to a distance of
approximately 3-5 meters.
When it’s dark, that is when the night vision LEDs are
switched on, the images on the parent unit will be
displayed in black and white.
Attention: infra-red light cannot be perceived by the
human eye; that means you cannot tell whether the
infra-red LEDs are switched on with the naked eye.
P
Switching on/o:
Press and hold button for 3 seconds to switch the parent
V
volume.
X symbol appears when the
sound is disabled.
Sound indicators:
whether the baby is crying. In this way you can also monitor
baby monitor is located a bit further away in the room.
T
Press the button to talk back to your baby
depressed for as long as you’re speaking and release the
button to listen.
While using the talk-back function, the icon appears
in the screen.
Display o (parent sleep mode):
If the display brightness of the parent unit on your bedside
by pressing the button. The sound remains enabled.
See the section ‘VOX’
screen + sound when the baby is sleeping and to
switch them on again as soon as the baby starts crying
Pan/tilt:
Press and hold the or button to aim the camera to
The sound is disabled while orienting the camera of the
baby unit.
ZOOM: (enlarging)
button again to restore the normal view
screen when this function is enabled.
MENU OPERA
button.
Use the navigation button or to select the desired
option. Press the OK button to open the selected option.
Lullabies:
or to select the
‘Lullabies’OK button
or button to select the desired lullaby o
OK
button
3. button to leave the menu and to return to
the normal screen or wait for 10 seconds until this happens
automatically
Playback of the lullabies is stopped automatically after
approximately 20 minutes. Y
menu and select STOP
At the bottom of the menu you also have the option to
adjust the playback volume of the lullabies at the baby
unit.
Keep in mind that the sound of the lullaby is returned to
the parent unit via the microphone of the baby unit. In
this case, you may want to set the sound of the parent unit to
level 0 (= sound o).
As soon as and for as long the lullabies are being
played, the symbol appears at the top in the display
View:
you may use this menu to select which view must be dis-
played in the screen.
or to select the
‘View’OK button
or button to select which camera you’d like to
5 seconds one after the other and press the OK button
Attention: The unit does NOT automatically switch to a
camera where sounds are being detected.
T
This menu allows you to input a minimum and maximum value
or to select the
‘TOK button
• ‘Low T
•
set these options with the or button
•
•
• ‘OFF’
•
press the OK button to select this setting
3. button to leave the menu and to return to
the normal screen or wait for 10 seconds until this happens
automatically.
DVM-275
USER’S MANUAL
INTRODUCTION
•
•
have the baby monitor switch on.
•
foil from the parent and baby unit.
About this user
always adhere to the instructions described in this
documentation.
This symbol is followed by a user
this user
DECLARA
-
Press and hold for 3 seconds to switch the parent unit on
again to switch the display back on.
press and repeatedly to increase or decrease the
volume
press and hold to move the camera up or down (tilt
function)
press and repeatedly to select the desired setting
press and hold to move the camera left or right (pan
function)
press and repeatedly to select the desired setting
BABY
register the baby unit on the
parent unit. See the related
instructions further on in this
manual.
Parent unit table stand:
the stand at the rear of the device.
Baby unit wall mount:
” tripod nail
bracket to place the baby unit in a higher position or to mount
FUNCTION O
P
step.
press again to restore the normal view
selected setting.
12 5
3
10
8
OK
OK
