548910

Alecto BW-80 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
12
IMPORTANT USER TIPS
The fi nal temperature of the milk or food is determined by the amount of water in
the bottle warmer. If the temperature is too high, it is recommended to use less
water in the bottle warmer. In case the temperature is too low, use more water.
It is advised to regularly take out the bottle or pot and shake or stir well for an
even heating of the content.
IMPORTANT SAFEGUARDS
• Read and save these instructions.
• Never use the unit without water in it.
• Do not move an appliance containing hot liquids.
• Do not immerse appliance, cord or plugs in water or other liquid.
• Place the Baby Bottle Warmer out of the reach of children and on a dry, non-
slip, horizontal surface.
• Close supervision is necessary when the unit is used near children.
• Do not let cord hang over edge of table or counter.
• Do not place on hot surfaces or in a heated oven.
• Only use the Baby Bottle Warmer when the ambient temperature is between
+7ºC and +37ºC.
• Change the water in the bottle warmer each time after use for hygienic rea-
sons.
OPERATION
1. Place the pot (without lid) or bottle in the container and fi ll the space between
the bottle and the inner container with water up to half the bottle's content.
2. Position the temperature regulator to the requested setting (MILK, FOOD,
STERILISE of 100ºC).
3. Zet de temperatuur regelaar op de gewenste stand
(MILK, FOOD, STERILISE of 100ºC).
- Milk: Warm up milk in a bottle.
- Food: Warm up food in pot, place the pot into basket.
- Sterilise: Sterilize soothers etc, place items into basket and apply
- about 40ml of water.
- 100ºC: Boil water for other personal use.
4. Put the mains plug into 230V wall socket of with the use of the 12V adapter
5. into the 12V car socket. Attention the adapter fi ts on two ways but only one
works.
6. The indication lamp lights, indicating that the water is being heat up. As soon
as this lamp dims, the water has reached its temperature and from now on the
lamp will go on and off on a regular base, indicating that the water is kept on
the set temperature.
GB
12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto BW-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto BW-80 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info