552924

Alecto BW-71 Manual

14
Zoom out
Zoom in
Previous page
1/16
Next page
14
IMPORTANT SAFEGUARDS
– Read and save these instructions.
– Never use the unit without water in it.
– Do not move an appliance containing hot liquids.
– Do not immerse appliance, cord or plugs in water or other liquid.
– Place the Baby Bottle Warmer out of the reach of children and on a dry, non-
slip, horizontal surface.
– Close supervision is necessary when the unit is used near children.
– Do not let cord hang over edge of table or counter.
– Do not place on hot surfaces or in a heated oven.
– Only use the Baby Bottle Warmer when the ambient temperature is between
+7ºC and +37ºC.
– Change the water in the bottle warmer often for hygienic reasons.
OPERATION
Warming baby bottles:
1. Slide the control knob into position “0” (off).
2. Place the bottle in the container and fi ll the space between the bottle and the
inner container with water up to half the bottle's content.
3. Plug the Baby Bottle Warmer into the mains socket.
4. Slide the control knob into position “
”. The indicator lamp “ ” lights to
indicate the heating operation.
5. After some minutes the milk will have reached just the right temperature for
your baby. The indicator lamp “
” goes out and the indicator lamp “
”
lights;
the same time you will hear some beeps.
6. Slide the control knob into position “0” (off) and disconnect the Baby Bottle
Warmer from the mains socket.
7. Remove the bottle from the container and shake it a little to distribute the heat
evenly before you allow your baby to drink.
Warming baby food jars:
1. Slide the control knob into position “0” (off).
2. Remove the label and lid from the jar.
3. Place the jar in the container using the lifter and fi ll the space between the jar
and the inner container with water up to just below the top of the jar.
4. Plug the Baby Bottle Warmer into the mains socket.
5. Slide the control knob into position “ ”. The indicator lamp “ ” lights to
indicate the heating operation.
6. Use the lifter to stir the contents of the jar frequently for more rapid distribution
of heat. After a few minutes the food will have reached just the right
temperature for your baby. The indicator lamp “ ” goes out and the indicator
lamp “
”
lights.
7. Slide the control knob into position “0” (off) and disconnect the Baby Bottle
Warmer from the mains socket.
8. Remove the jar from the container.
… 14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto BW-71 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto BW-71 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info