586676
56
Zoom out
Zoom in
Previous page
1/59
Next page
56
No display
The battery may be flat, dead or incorrectly inserted.
Recharge or replace the battery.
Handset displays “Out of range or no pwr at base”
Is the handset registered correctly to the base?
Check that the mains power is correctly connected.
Check that the handset is within range of the base.
Is the battery low? Place the handset on the base/charger to recharge.
You hear the busy tone when you press
Make sure the handset is in range of the base.
Another handset registered to your Alcatel XP 1050 base may be on the
line.
Answering machine does not record any messages
Make sure the answering machine is switched on.
The memory may be full, please delete some old messages to free up space.
Cannot access your messages from another phone
Have you changed the remote access security PIN code?
Make sure you are calling from a touch-tone telephone. When dialling a
number, there should be tones.
The answering machine might not detect the remote access code when your
outgoing message is playing. Wait until the outgoing message is over before
entering the code.
There might be interference on the telephone line you are using. Press the
dial pad keys firmly when dialing.
Buzzing noise on my phone or on other electrical equipment nearby
Sometimes your Alcatel XP 1050 can interfere with other electrical
equipment if it is placed too close. It is recommended that you place your
Alcatel XP 1050 at least one metre away from electrical appliances or
metal obstructions to avoid any risk of interference.
If you have an ADSL internet service ensure correct filters are installed to
prevent interference.
The store where you bought your telephone can also provide you with
information and after-sales support.
IMPORTANT
This product features Power Fail Back-Up. During a mains power interruption
within first 4 hours and handset is put on base cradle, the power stored in the
handset battery can be supplied to the main base, so you can make calls or
receive calls. To make calls or answer calls, you can refer to section 4.4 and 4.5.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alcatel XP1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alcatel XP1050 in the language / languages: English as an attachment in your email.

The manual is 10,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info