586654

Alcatel T60 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
SETTING THE PHONE
NOTE: Program the following settings before using the
phone.
There are 6 options to set:
WALL MOUNTING
1. Rotate the wall mounting knob as shown below:
Wall mounting
knob Location
Rotate 180°
WALL MOUNTING: The knob is designed
to keep this unit in place when the
telephone is vertically placed on the wall.
2. Install the base unit to the wall and then plug one end of line
cord into the base and the other end into the modular telephone
line jack.
3. Fix the telephone on the wall as shown below.
OPTIONS MENU
TELEPHONE JACK REQUIREMENTS
To use this phone, you need a RJ11C type modular telephone jack,
(similar to the one pictured here) installed in your home. Call your
local phone company to have one installed.
Modular telephone line jack
Wall plate
NOTE: If there is any item missing in the package, please
contact the shop where you bought this product.
INSTALLATION
Never install telephone wiring during a lightning storm.
Never touch un-insulated telephone wires or terminals, unless
the telephone line has been disconnected at the network
interface.
Install or modify telephone lines with caution.
Never install telephone to operate in wet or damp locations.
CAUTION: Disconnect the phone cord from the wall
outlet before installing or replacing the batteries.
INSTALLING AND REPLACING THE BATTERIES
Your Caller ID phone uses 3 AA-Size alkaline batteries for receiving
and storing Caller ID records and storing the number.
IMPORTANT: If you are not going to use the telephone
for more than 30 days, remove the batteries.
Month Day Hour
Low battery indicator
Speakerphone
Mute Mic Repeat New CID Call-log
Number
Voice mail
Morning
Afternoon
Minutes
Down button
Mute button
Flash button
M4 button
M3 button
Dial back button
Up button
Menu button
Delete button
Store button
M1 button
M2 button
Speaker Volume button
Speaker button
Display
Ringer Volume Switch
PARTS CHECKLIST
Your package includes the following items:
User’s Guide Base Handset Coiled cord Line cord
INTRODUCTION
<RXU&DOOHU,'SKRQHVWRUHVDQGGLVSOD\VVSHFL¿FLQIRUPDWLRQ
provided by your local telephone company, to subscribers of
&DOOHU,'RUVLPLODUFDOOHULGHQWL¿FDWLRQVHUYLFHV
MAIN FEATURES
FSK/DTMF auto detect.
Alphanumerical backlight display.
6 languages interface selection.
Record up to 58 incoming caller names and numbers.
Record up to 10 recent dialed numbers.
10 two-touch memories.
4 one-touch memories.
Redial.
Pulse or Tone dialing mode.
Flash timing selectable.
Mute function.
Speakerphone.
SHORT GLOSSARY OF TERMINOLOGY USED IN
THIS MANUAL
Hook switch. The part of the phone that pops up to activate the
phone line when the handset is lifted from the base.
Off-hook. The phone is in active mode when the handset is off
the base cradle or the SPEAKER feature is on.
On-hook. The phone is in standby mode when the handset is on
the base cradle.
Your Caller ID phone enables you to:
Identify callers before you answer the phone.
View the time and date of each incoming call.
Record up to 58 Caller ID name and number messages
sequentially.
To get the most from your new phone, please read through this
user’s guide.
BATTERY
1. If the telephone line cord is connected, disconnect it from the
base unit.
2. Carefully turn the phone over, use a pen or paper clip to loosen
the battery cover. Open the battery compartment by pushing
on the battery cover and sliding it away from the unit.
3. Insert 3 AA-size alkaline batteries (not included) as shown on
the engraving in the battery
compartment.
4. Snap the battery compartment
door back into place.
5. Reconnect the telephone
line cord to the base.
INSTALLING THE PHONE
Your phone should be placed on a level surface, such as a desk or
table top, or you can mount it on a wall.
1. Connect the handset.
2. Connect the telephone
line.
Phone
number display
Name display
Microphone
Redial/Pause button
Time format
Date format
English/French/Spanish/
Turkish/Polish/Greece
SETTING DATE/TIME
Enter Month, Day,
Hour and Minute
OR OR
SETTING LANGUAGE
Select Language
OR OR
SETTING LOCAL AREA CODE
The area code prior to an incoming number will be removed from
the caller ID display if it matches with the area code you set.
Enter your area code
OR
SETTING LONG DIST CODE
Enter your long
distance code
OR
SETTING FLASH TIME
Select timing
100/300/1000/600
OR OR
SETTING TONE/PULSE
Select Tone or Pulse
OR
OR
ALCATEL T60
ATLINKS Europe, 22 quai Gallieni 92150 Surensnes - France
Alcatel Logo and Alcatel name are trademarks of Alcatel Lucent and used under license by Atlinks.
ALCATEL T60
ATLINKS Europe, 22 quai Gallieni 92150 Surensnes - France
Alcatel Logo and Alcatel name are trademarks of Alcatel Lucent and used under license by Atlinks.
:+>ਸ਼ކપޢа࠳வ1࣒މ৚ु͹4:ޛ386࣒މ৚ु͹:>>
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alcatel T60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alcatel T60 in the language / languages: English as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info