611191

Alcatel IP Touch 610 WLAN Handset Manual

25
Zoom out
Zoom in
Previous page
1/27
Next page
Push to Talk (IP Touch 610 WLAN)
25
7
Other
The Push-to-talk feature allows the IP Touch 610 WLAN to operate in a push-to-talk (PTT) group broadcast mode in addition
to the standard telephone operation.
The IP Touch 610 WLAN telephone supports 8 multicast channels. The channel used is saved in the telephone memory. A PTT
call is initiated by pressing the Talk button located on the right side of the handset. All IP Touch 610 WLAN monitoring that
channel and that have enabled the PTT feature in the user preferences menu will hear the transmission through group listening..
PTT dialogue is interrupted when you answer a PBX call. When the PBX call is ended, PTT dialogue resumes if in an active call.
The 'Push-to-talk' function, activated by the system administrator can be configured by the user via the set local menu (OK key,
'Push-to-Talk' function).
7.1
Start the call
The call period. The two-way radio operates on the concept of a push-to-talk session or call period. The push-to-talk call period
begins with the first transmission and ends when there has been no traffic on the channel for 10 seconds. The keypad cannot be
used for any other function. However, it is possible to place a PBX call.
7.2
Adjusting the volume level of the tones
7.3
Subscribing to channels
Once they are subscribed, the channels automatically appear in the list of default channels.
The 'start transmit ' sound indicates
that you can start talking'
press and
release the 'talk'
button
press the 'talk '
button- (press and
hold down the key)
talk with the
handset 2 inches (5
cm) away
The IP Touch 610 WLAN then enters the
waiting state where it monitors the
channel for up to 10 seconds
release the 'talk '
button
adjust audio
volume
OK
OK
Push to talk
OK
OK
Tone Volume
OK
OK
OR
OK
go to the channel
and select it
OK
OK
Push to talk
OK
OK
Subscribed chans
OK
OK
7.4
Making a call on another channel
You may need to make a call on another channel than the one defined by default. You must first subscribe to new channels.
7.5
Receiving a call
Upon receiving a PTT transmission, the phone plays the 'receiving alert' sound and enters the receive state. In this state the phone
receives all conversations on the selected channel. The phone will ignore the Talk key while in the receive state. The screen shows
the current active channel, the caller ID information of the current transmitter, and an indication that the phone is receiving a
broadcast transmission. During a 'PBX' conversation, the IP Touch 610 WLAN is not able to receive a PTT transmission. At the
end of a transmission, the phone enters the waiting state where it monitors the channel for up to 10 seconds and displays 'Waiting'
on the screen. If no other transmission occurs within 10 seconds the phone plays the 'end call' sound and reverts to idle state.
7.6
Selecting a channel
To add channels to the default list of channels, see the channels subscription function.
press and
release the 'talk'
button ( twice)
select the channel using the
navigator or the volume
level adjustment keys
start the call ('talk' key
pressed and held down)
OK
OR
OK
go to the channel and select it
OK
OK
Push to talk
OK
OK
Default Channel
OK
OK
OK
… 25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alcatel IP Touch 610 WLAN Handset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alcatel IP Touch 610 WLAN Handset in the language / languages: English as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alcatel IP Touch 610 WLAN Handset

Alcatel IP Touch 610 WLAN Handset User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info