601518

Al-ko HT 440 BAsic cuT Manual

14
Zoom out
Zoom in
Previous page
1/166
Next page
Translation of original user instructions
14
AL-KO Hedge trimmer
Technical data
Technical data HT 440 Basic Cut HT 550 Safety Cut
Power consumption 440 W 550 W
Cutter length 440 mm 520 mm
Cutting thickness 16 mm 18 mm
Total weight 3,2 kg 3,6 kg
Vibrations measured at handle* 2,2 m/s² (K = 1,5 m/s²) 2,9 m/s² (K = 1,5 m/s²)
Mains voltage 230V~240V / 50Hz 230V~240V / 50Hz
Insulation class
/ II / II
No-load stroke rate 1600 m
-1
1600 m
-1
Sound pressure level L
PA
86 dB (A) (K = 1,5 dB (A)) 86 dB(A) (K = 1,5 dB (A))
* The declared vibration total value has been measured in accordance with a standard test method and may be
used for comparing one tool with another. The declared vibration total value may also be used in a preliminary
assessment of exposure.
Safety instructions
General Power Tool Safety Warnings
Warning!
The vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the tool is used.
Of the need to identify safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Caution!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
Caution - Risk of injury!
Safety/protection devices should not be disabled!
Caution - Danger of electrocution!
If the cable has been cut or is damaged, discon-
nect the plug from the mains supply immediately.
Caution!
Use the equipment only if it is in correct operating
condition! Before using, check the machine, cable
and plug for damage; any damaged parts must be
repaired or replaced at a specialised repair centre.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko HT 440 BAsic cuT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko HT 440 BAsic cuT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info