601531
16
Zoom out
Zoom in
Previous page
1/188
Next page
en
Product overview
16 HT 18V Li
WARNING!
The actual vibration values may differ
from those specified, depending on what
the electrical tool is used for.
Take measures to protect yourself
against vibration loads. In doing so, take
account of the entire working process,
i.e. also times during which the electrical
tool is operating without load, or is swit-
ched off.
Suitable measures include regular main-
tenance and care of the electrical tool
and the tool attachments, keeping your
hands warm, taking regular breaks and
planning the working sequences effec-
tively.
WARNING!
Wear ear defenders to prevent impair-
ment of hearing.
CAUTION!
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock,
fire and/ or serious injury.
CAUTION!
Save all warnings and instructions for fu-
ture reference.
The term “power tool” in the warnings
refers to your mainsoperated (corded)
power tool or battery-operated (cordless)
power tool.
CAUTION!
Use the equipment only if it is in correct
operating condition!
Before using, check the machine, ca-
ble and plug for damage; any damaged
parts must be repaired or replaced at a
specialised repair centre.
CAUTION!
Risk of injury!
Safety and protective devices should not
be disabled.
CAUTION!
Gefahr durch Strom!
Immediately disconnect the plug from
the mains if the cable is damaged or se-
vered!
GENERAL SAFETY INSTRUCIONS FOR
ELECTRICAL POWER TOOLS
Work area safety
Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
Do not work with the power tool in a hazar-
dous environment where are flammable li-
quids, gases or dusts. Power tools create
sparks which may ignite the dust or fumes.
Keep children and bystanders away while
operating a machine. Distractions can
cause you to lose control.
Electrical safety
Power tool plugs must match the out-
let. Never modifythe plug in any way.
Do not use any adapter plugs witheart-
hed (grounded) power tools. Unmodified
plugs andmatching outlets will reduce risk of
electric shock.
Avoid body contact with earthed or groun-
ded surfaces,such as pipes, radiators,
ranges and refrigerators. There is an in-
creased risk of electric shock if your body ise-
arthed or grounded.
Do not expose power tools to rain or wet
conditions. . Water entering a power tool will
increase the risk of electricshock.
Do not abuse the cord. Never use the
cord for carrying,pulling or unplugging
the power tool. Keep cord awayfrom heat,
oil, sharp edges and moving parts. Dama-
gedor entangled cords increase the risk of
electric shock.
When operating a power tool outdoors,
use an extensioncord suitable for outdoor
use. Use of a cord suitablefor outdoor use re-
duces the risk of electric shock.
If operating a power tool in a damp loca-
tion is unavoidable,use a residual current
device (RCD) protectedsupply. Use of an
RCD reduces the risk of electric shock.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko Akku-Heckenschere HT 18V Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Akku-Heckenschere HT 18V Li in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info