601533
13
Zoom out
Zoom in
Previous page
1/132
Next page
EN
Translation of original user instructions
13
GS 3,7 Li Multi Cutter
1. Connect the charger using the charging point on
the rechargeable grass and shrub cutter. (
1)
2. Connect the charger to the mains supply.
The charging process starts when the green LED
remains constantly illuminated. The battery is fully
charged once the LED is no longer illuminated.
(
1)
The temperature range for the charging process
should between 0 °C and +45 °C.
Maximum charging time: 4 h
3. Disconnect the plug from the charging device and
from the device.
The battery is protected from overcharging and
can thus remain connected to the mains supply.
Operation
Turn on the device
1. Push the die kill-switch forwards. ( 2-1)
2. Press the activating switch. (
2-2)
3. You can release the kill switch whilst you press
the switch.
A clicking sound can be heard after you have
turned the device on. This is due to the mechanics
and fully normal.
Turn off the device
1. Release the activation switch.
2. Wait until the blade stops moving. The blade contin-
ues to run after the motor has been switched off!
Changing the blade
Danger - risk of injury!
The blades continue to run after the motor has
been switched off!
Danger - risk of injury!
Always put the blade protection into protection in
place and wear protective gloves!
3. Press both unlocking buttons together to take out
the blade. (
3)
4. Lubricate the gearbox enclosure with grease
regularly.
5. Insert the blade into the mounting and press it
rmly into the base of the blade to click it into place.
(
4)
6. Clean the blade with a brush or dry cloth. Remove
any impurities that may be present from the gear-
box enclosure. (
5)
Information on operation
Only use if visibility is good.
Only work with a sharp cutter blade.
The operating time of the shrub cutter depends on
the condition of the battery and the properties of the
items being cut. Frequently switching the device on
and off reduces the operating time.
Storing the rechargeable grass and shrub
cutter and charger
Store the device in a place inaccessible to children
and unauthorised persons.
Only store the device with the blade protection
attached.
Do not place any other objects on the device.
Store the device in a dry, frost-free location with an
ambient temperature between 0 °C and +35 °C.
Only store the device with the battery fully charged.
Recharge the battery for approximately 2 hours
after a 6-month storage period.
The optimum temperature for storing the device
is between 0 °C and 20 °C.
Repairs
Repairs must only be carried out at AL-KO service
centres or authorised specialist rms.
Only use original parts.
Maintenance and care
Danger - risk of injury!
Always wear work gloves when carrying out
maintenance on the cutter blade!
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko AKKU-GrAs- Und strAUchschere Gs 3.7 Li MULti cUtter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko AKKU-GrAs- Und strAUchschere Gs 3.7 Li MULti cUtter in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info