Manual AKO WW 151 E (page 4 of 16) (English, German, Dutch, French, Italian, Spanish)

520612

Zoom out

Zoom in

1/16

Installation and Operating Instructions

Radiant panel heater WW 101/151/201 E

1. Important Information

Keep these instructions in a safe place and pass them on to

possible future owners.

• Use device for room heating within enclosed rooms only.

• Repairs and corrective measures may only be carried out by

a qualified technician.

• Disconnect the power supply in the event of fault (discon-

nect the device plug or switch off the fuse).

• Do not use this device next to a bathtub, shower, washbasin

or swimming pool.

• The device carries the symbol shown on the right,

which indicates that the heating device must under

no circumstances be covered with any objects.

• Caution! The outer surfaces of the device, and in

particular the air outlet grid, become hot during operation.

• Children or persons who are not capable of operating the

heating device safely must not operate it. Ensure that child-

ren do not play with the device.

• Caution! Potential dangers can arise when the device swit-

ches on automatically, e.g. devices which have been cover-

ed or blocked by objects since they were last used could

cause fires.

• The heating device must not be operated in rooms where

highly flammable substances are used (e.g. solvents, etc.).

• Do not lay the connecting cable across the hot device.

2. Installation

The heating device may only be installed as shown, i.e. on a

horizontal, even surface. Use on deep-pile carpets is not per-

mitted. Please exercise caution when installing it in front of

flammable objects. Installation below a wall socket is not per-

missible. Minimum clearances must be observed.

In addition, a minimum clearance of 500 mm must be maintai-

ned between flammable objects e.g. curtains, towels or heat-

sensitive plastics and the front of the unit.

Use in the bathroom

Use the device such that it is not possible for someone in the

bath or shower to touch the control elements.

In accordance with VDE 0100 Part 701, the device must not be

fitted in protected zones 0 and 1. The device must receive its

power supply via a protective residual current device (FI).

Installation of the supporting feet

Do not operate the heating device without the feet supplied

being fitted.

Model WW 101 E is supplied without casters.

Supporting feet, casters and the

two fixing screws are provided

loose.

Screw down supporting feet as

shown and attach casters if re-

quired.

Wall mounting

The heating device must be ali-

gned horizontally and installed on

a vertical wall (see illustration).

Make sure that the inflow and out-

flow of air at the top and bottom of

the device are unimpeded

- Drill fixing holes for the two wall

brackets at distance "A" and

plug.

- Screw down wall brackets and

attach heater.

3. Electrical Connection

The voltage specified on the type plate must match the local

mains voltage.

If the power cord of this device is damaged, it must be replaced

by the manufacturer, the manufacturer's after-sales service or

a similarly qualified person, in order to prevent risks.

The device plug must always be accessible. In order to avoid

hazards due to inadvertent resetting of the thermal cut-out, this

appliance must not be supplied through an external switching

device, such as a timer, or connected to a circuit that is regu-

larly switched on and off by the utility company.

Model WW 101 E WW 151 E WW 201 E

Dimension A 286 mm 486 mm 686 mm

Dimension B 635 mm 835 mm 1035 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AKO WW 151 E in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AKO WW 151 E Manual

Product: