158557
2
Zoom out
Zoom in
Previous page
1/3
Next page
LISTENING TO THE TUNER
1. Press the POWER ON/OFF (22).
2. Press the TUNER Button(9), the TUNER LED Indicator(25) will light up.
3. Open the Control Button Cover(17).
4. Select AM/FM band by the Band Switch (14).
5. Select your radio station by turning TUNING Knob(7 & 28) and adjust the volume level by pressing
VOLUME / Button(21)
6. Press X-BASS Button(19) if extra bass is desired. The X-BASS LED indicator(5) will light up.
FOR BEST RECEPTION :
FM : Loose the FM Antenna wire(33), when select the stereo mode by the MONO /STEREO Push Switch(13), and the stereo
broadcast was received, FM STEREO LED(2) will light up.
AM : This unit is equip with a built-in directional ferrite antenna, so move and rotate the unit.
7. To stop listen the radio, press the POWER ON/OFF (22).
LISTEN TO THE CD
1. Press the POWER ON/OFF (22).
2. Press the CD button(8), the CD LED Indicator(24) will light up and the CD Track Number Display(1) will show ”.
3. Insert the disc (Label side up) to the CD Compartment(29 & 30), the total number of track is displayed(1).
4. Press CD PLAY/PAUSE Button(10) to start playing and adjust the VOLUME level(21).
5. Press the X-BASS Button(19) if extra bass is desired. The X-BASS LED indicator(5) will light up.
NOTE : Use also CD PLAY/PAUSE button(10) to suspend momentarily the playing track. The current track number
blinks on the display(1), and press again to resume play.
6. Press CD STOP button(11) to stop listen the CD.
OTHER CD PLAYER FUNCTIONS
CD SKIP/FAST SEARCH Button(18) : Press to skip forward to the next track or repeatedly to skip several
tracks. Press Button return to the beginning of the track, or press repeatedly to skip backward several tracks. Press and
hold the or button to search quickly within a track.
REPEAT BUTTON(15) : A single Track or whole CD can be repeated as any time as you like.
a) Press once to repeat your select track, the REPEAT LED (3) will blinks
b) Press twice to play the disc continuously, the REPEAT LED (3) will light up.
c) Press again to switch off this function.
MIX BUTTON(12) : Press to play randomly all the track & REPEAT ALL, the MIX LED(6) and REPEAT LED will light up and
the selected track number are displayed(1).
PROGRAM BUTTON(16) : To select your own musical program.
a) Insert the disc(29 & 30), the total number of the tracks is displayed(1).
b) Press PROG. Button(16), the PROGRAM LED Indicator(23) and the track No. and CD
TRACK NUMBER DISPLAY (1) " " will blinks.
c) Select with SKIP/FAST SEARCH (18) your desired track, then press PROGRAM
Button(16) to store your program in memory and the " " & PROGRAM LED blinks. Redo
this operation as many times as necessary. 16 tracks can memorised.
d) Press CD PLAY/PAUSE Button(10) to start playing and the PROGRAM LED Indicator(23)
will become light up.
e) Press CD Stop Button(11) to stop the disc. PROGRAM LED(23) continue light on. Press stop
Button (11) again to cancel this function.
- 3 - - 4 -
POWER SUPPLY
This set operates at AC 240V - 50Hz
1. Insert the AC Power Cord(32) into a convenient standard outlet.
Note: If the unit is switched off by pressing the STANDBY button on the remote control, it will be kept in the memory of
standby. To turn on the unit:
- by presing the STANDBY button on the remote control or
- by pressing the POWER ON/OFF button (22) on the unit. Wait for about 5 seconds, press the same button again. The unit
will be reset to tuner mode and the tuner LED indicator (25) will light on.
CONNECT THE SPEAKER
1. Loose the Speaker Wire(35) and connect to the Speaker Terminal(31),
BLACK/WHITE wire connect to RED terminal,
BLACK wire connect to BLACK terminal.
2. Locate two speakers to a far distance can get the good stereo effect.
Black &
White
Black
REMOTE HANDSET
1. STAND BY : turn unit on/off (STANDBY mode)
2. CD : turn CD mode on
3. SKIP / SEARCH :
skip the CD track or search within a track.
4. VOLUME + / - : turn volume up / down
5. PLAY : play or pause CD play
6. STOP : stop CD play
7. TUNER : turn tuner mode on and select waveband
USE OF REMOTE CONTROL
1. Open the Battery Compartment
2. Insert two AAA batteries (not supplied), make sure to match
“+” and “-” of the batteries to marks in the battery
compartment.
3. Close the battery compartment.
4. Point the remote control at the remote sensor, operate in the range of 5 meters and 60º from the front of the
remote sensor. Make sure there is no barrier between them.
Notes: 1. Batteries can last for about 6 months generally. Change the batteries if the remote control does not work.
2. If the remote control is not used for a long time, remove the batteries to prevent battery leakage.
3. Do not charge, heat open, or short-circuit the batteries. Do not throw batteries into a fire.
1
2
4
3
5
6
7
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai qx 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai qx 2100 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Akai qx 2100

Akai qx 2100 User Manual - French - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info