630544
5
Zoom out
Zoom in
Previous page
1/56
Next page
5
10. Pads: Press these pads to trigger the samples on an inserted SD card (sold separately).
The pads are velocity-sensitive, which makes them very responsive and intuitive to play.
See Operation > Editing Pads to learn more.
The pads light up different colors to indicate their current states:
Off (no color): The pad has no sample assigned to it.
Amber: The pad has a sample assigned to it.
Green: The pad's assigned sample is currently playing.
Red: The pad is currently being edited (whether or not a sample is assigned to it).
11. Pad Edit: Press this button to cycle through the available parameters that the knobs
control. See Operation > Editing Pads section to learn more.
12. Parameter Knobs: Turn these knobs to adjust the currently selected parameter shown
above each one. See Operation > Editing Pads chapter to learn more.
Rear Panel
1
4
7
6589
23
1. DC In: If you do not want to use a computer in your setup (i.e., if you are using MPX16 to
control an external MIDI module), connect this jack to a power outlet using the included
power adapter (5.8V DC, 860mA, center-positive). Alternatively, you can connect
MPX16's USB Port to a power outlet using a standard USB charger (sold separately).
2. Power Button: Press this button to power MPX16 on or off.
3. USB Port: Use a standard USB cable to connect this USB port to your computer. The
computer's USB port provides ample power to MPX16, though you may use the included
power adapter instead. You can also power MPX16 by connecting this USB port to a
power outlet using a standard USB charger (sold separately). This connection is also
used to send and receive MIDI data to and from your computer.
4. SD Card Slot: Insert a standard SD card containing samples into this slot. Use the MPX
File Conversion Utility (downloadable for free at akaipro.com/mpx16) to load samples
onto an SD card. If you choose to load samples to an SD card without using the MPX File
Conversion Utility, please see Operation > Editing Samples to make sure they are
formatted properly.
5. Rec In: Use standard 1/4" (6.35mm) TRS cables to connect these inputs to an external
audio source to record into MPX16. Control the input recording level with the Rec Gain
knob. If you want to record a mono source instead of a stereo one, connect to the left (L)
input only. Connecting a cable to either of these jacks automatically disables the
Microphone.
6. MIDI In: Use a standard five-pin MIDI cable to connect this MIDI In to the MIDI Out of an
external MIDI device (e.g., another MIDI controller).
7. MIDI Out: Use a standard five-pin MIDI cable to connect this MIDI Out to the MIDI In of
an external MIDI device (e.g., a synthesizer, sequencer, drum machine, etc.).
8. Main Out: Use standard 1/4" (6.35 mm) TS cables to connect these outputs to a speaker
or amplifier system. For mono sound, connect a cable to the left (L) output only. Adjust
the volume of these outputs with the Volume knob.
9. Headphone Out: Connect standard 1/4" (6.35 mm) stereo headphones to connect this
output. Adjust the volume of this output with the Volume knob.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPX16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPX16 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info