630518

Akai MPC Touch Manual

297
Zoom out
Zoom in
Previous page
1/301
Next page
297
Note On and
Note Off
This is the most important MIDI message. It determines the pitch and velocity of
a generated note. A note-on message will start a note. Its pitch is derived from
the note number, which can range from 0 to 127. The velocity lies between 1 and
127. A velocity value of 0 is equivalent to a note-off message.
Normalize Normalization is a function to raise the level of a sample to its maximum (0 dB)
without causing distortion. This function automatically searches a sample for its
maximum level and consequently raises the entire sample’s level until the
previously determined maximum level reaches 0 dB. In general this results in a
higher overall volume of the sample.
Panning
The process or the result of changing a signal’s position within the stereo
panorama.
Pitch-Bend
Pitch-bend is a MIDI message. Although pitch-bend messages are similar in
function to control change messages, they are a distinct type of message. The
resolution of a pitch-bend message is substantially higher than that of a
conventional controller message. The human ear is exceptionally sensitive to
deviations in pitch, so the higher resolution is used because it relays pitch-bend
information more accurately.
Program
A program is a file that contains a list of all samples to be used, and settings for
each sample (e.g., pad assignments, loop points, pitch tuning, effects, etc.)
MPC’s Program Edit Mode is where you can edit and assign samples. The
software can have a total of 128 programs in a project.
There are two kinds of programs that use samples for their sound source: drum
programs, mostly used for creating drum programs and easy and quick
assigning of samples to a pad, and keygroups programs. With keygroup
programs, you can use one sample (or more) and spread it across two or more
keys and play the sample chromatically over a keyboard. That way, there is no
need to sample every key of, for instance, a piano.
Program Change
These are MIDI messages that select sound programs. Program numbers 1
through 128 can be changed via program change messages.
… 297 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai MPC Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai MPC Touch in the language / languages: English as an attachment in your email.

The manual is 43,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info