630570
11
Zoom out
Zoom in
Previous page
1/14
Next page
LOOPING REC mode
Basic Operation
1. Select LOOPING REC mode by pressing the MODE SELECT switch.
Note: You can also change the mode by pressing both Footswitches simultaneously.
2. Set the LEVEL control to the maximum position by turning it fully clockwise.
3. Tap the right Footswitch (REC/OVER DUB) at the point you want to start the recording. The red LED on the
right lights up and the recording starts.
4. Tap the right Footswitch again, and the red LED on the right turns off and the recording stops. The green LED
on the left lights and the parts you recorded begin looping playback.
5. If you want to over-dub to your recorded sound, tap the right Footswitch. The red LED on the right lights and
over-dubbing starts. You can now record a new phrase.
6. When you tap the left Footswitch (PLAY/STOP), the red LED turns off and over-dub recording stops, and the
recording, with over-dub part, begins looping playback.
This allows you to over-dub record many times by repeating procedures 5 & 6.
About OVER DUB
If you want to do OVER DUB recording, you must drop out of recording before half of the maximum recording time
is used. While you're recording your first part (above procedure 3), the right red LED will start blinking at 3
seconds before half of the maximum recording time is used. If you want to Over-dub a part, tap the left Footswitch
before this LED finishes blinking.
Hints: During Over-dub, if you tap the right Footswitch, it discards the Over-dubbed phrase and retains only your
first recorded phrase.
For example, during a live performance, you can record and play many phrases using over-dub, then after the song
progresses, you can easily return to the first recorded phrase.
Hints: During playback of the looping phrase, if you tap the left Footswitch, the playback will stop. If you tap the left
Footswitch again, playback of the looping phrase will start from the start point.
Hints: If you start the recording and the recording reaches the maximum recording time without tapping the left
Footswitch (i.e. you don't stop the recording), the recording will automatically stop and start looping the phrase.
Fine Setting
In the LOOPING REC mode, only the LEVEL control, LOOP LEVEL switch, and LOOP TIME switch can be used.
LEVEL : Adjusts the output level of the looping sound.
LOOP LEVEL switch
When the LOOP LEVEL switch is set to VARI, it allows you to adjust the output level of the looping sound with the
LEVEL control.
When the LOOP LEVEL switch is set to FIX, the output level of the looping sound is set at the maximum level.
(LEVEL control does not work)
Hints: When you want to change the mode between LOOPING REC and other modes while playing your guitar, you
can change the mode by pressing both Footswitches at once.
But it may be inconvenient since the LEVEL settings are common between LOOPING REC and the other modes.
In this case, as the LEVEL on LOOPING REC is usually set to maximum, you can use the LEVEL control as other
DELAY mode by setting LOOP LEVEL switch to FIX.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai E2 HeadRush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai E2 HeadRush in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info