39986
14
Zoom out
Zoom in
Previous page
1/18
Next page
13
TEST TONE
It is to adjust playback level from different speakers and is only effective in Dolby Pro Logic and Dolby Digital
modes.
1. Press
T.TONE
(Remote label 28) repeatedly to see L, R, LS, RS, C, and SUB sequentially.
2. Press the
VOL UP / DOWN
(Remote label 31 and 32) to adjust the sound level of each speaker.
3. The adjustable range is between 10dB and +10dB.
* You will hear some noise like sound when adjusting.
SPEAKER SETTING (SPK SETTING)
It is to select the speaker(s) to which the sound signal is sent out.
Press the
SPK SETTING
(Remote label 26) then
SPK ON / OFF
(Remote label 27) to get the followings:
Display
Display
C
(it means the center speaker)
YES / NO
SL / SR
(it means the surround left and right speaker)
YES / NO
SPK SETTING
SUB
(it means the subwoofer)
SPK ON / OFF
YES / NO
* It cannot be adjusted under analog mode
DELAY TIME (Delay T.)
It is to adjust each speaker’s response time to output signal.
Press
SPK SETTING
(Remote label 26) then
DELAY T.
(Remote label 24 and 25). Then adjust by pressing the
DELAY T. UP / DOWN
(Remote label 24 and 25) repeatedly to get the followings:
Display Display Display
C CDL 0, 1, 2, 3, 4, 5
mS
SL / SR SDL 0, 5, 10, 15 mS
SPK SETTING
SUB
DELAY T.
VOL UP
/ DOWN
* It will have no response after pressing DELAY T. if that speaker is not connected.
BASS MANAGEMENT
It is to set the speaker bass.
1. Press
BASS MGT
(Remote label 12) to activate / off the bass of the speakers.
2. Choose from Mode 0, 1 or 2 for different bass combination.
Front L & R Center Surround L & R Subwoofer
Mode 0 Large large large On
Mode 1 Small small small On
Mode 2 Large small small On
* Small: speakers that cannot reproduce low sound of below 80 Hz with sufficient volume
Large: speakers that can fully reproduce low sound of below 80 Hz
* The small and large indication does not refer tot he physical size of the speakers, but according to the bass
reproduction capacity at 80 Hz.
* The default speaker setting is mode 1
DYNAMIC RANGE CONTROL (DYNAMIC)
It is to adjust the compression of the output sound level to protect you from hearing too loud sound / voice.
Large the compression, smaller the output sound level.
S
ETTING
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai AA-V2080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai AA-V2080 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info