1.Switch Power button to on, bluetooth indicate light flash.
Mode
Short press “M” button, Mode Switch order is
BT-USB PLAY-AUX. BT mode is Default mode for power
on/ off.
Play/Pause/TWS connection/BT disconnection
/Microphone
BT,AUX,USB play Mode,Short press“ ”to Pause music,
press again to replay.
TWS mode，double press“”to connection TWS.
BT play mode, long press“”to disconnect BT.
When have coming Call，Short press“ ”Answer the call，
Long press to reject the call Short press to hangup the call
during calling.
Previous Track
BT,USB play mode, short press“”to go to previous track，
AUX play mode do not support.
Next Track
BT，USB play mode，Short press“ ”to go to next track，
AUX play mode do not support.
Volume -
BT，USB，AUX play mode, press “”to decrease the volume
Volume +
BT，USB，AUX play mode，Press “”to increase the volume
BT,USB play mode, short press“”to go to previous track，
AUX play mode do not support.
USB play
Turn on the speaker, insert the U-disk，Orange indicator on,
Music Playing from U-disk Automitically
0
Please insert our provided cable connect with 5V/1A power
supply in to Micro USB charging slot.(Please purchase power
supply by yourself)
Fast Charge Slot
Please use 18V/2A adaptor insert into Fast
charge slot (Please purchase power adapotor by yourself)
Micro USB charging slot
Specification
Item:Bluetooth speaker
Rated Voltage:DC5V
Rated input current:1A
Bluetooth working rang:20M
Mid&high driver output:10W
Play time:4-6Hours
Dimension:225*58*106mm
Model name:SB-X120
Bluetooth version:4.2
Support Audio format:aptX/SBC/AAC/MP3
Battery:18650 /2600mAh
Bass driver output:20W
Charging time:3~4Hours
Weight:1100g
AUX Connect
Turn on the speaker， insert 3.5mm audio cable，white
indicator on，music playing from external audio source
device
Automitically
BT connect
Turn on the speaker, BT indicator light flash,open your
bluetooth device to search”SB-X120” and connect it.
BT indicator light stay on, BT connected sucessfully.
CMCC13:58
设置蓝牙
蓝牙
设备
HE-BM200
CMCC
已连接
未配对
现为可被发现状态
HE-BM200
CMCC13:58
Bluetooth
BT
Device
SettingngMusic Play
00.0004.18
Setting
Connected
SB-X120
SB-X120
TWS Play Mode:
Turn on the 2pcs of SB-X120 (no need Synchronous boot),
double press TWS connect button for 2 speakers, speaker are
ready to pair after one beep.After connected successfully, one
of the speaker’s BT indicate light flash( this unit is Host left
channel), and the other one’s BT indicate light stay on(this
unit is Secondary right channel), open BT device and search
“SB-X120”, select and connect it. connected successfully
after one beep.
BT indicator light stay on after music playing. both unit support
button operation.
Two device connection modes：（BT mode）
1.
When playing music，long press play/pause button to disconnect
current BT. then can connect with multiple devices after disconnected
succeffully.
2. Another BT device connected with speaker first, then the
old BT device connect with speaker, 2 BT devices connect
with speaker successfully.
Double Press TWS connect button
TWS disconnection
Long press TWS connect button of Host left channel unit, 2
speakers drop out of the TWS mode, disconnect with BT
device at the same time.
Long press TWS connect button of secondary right channel
unit, 2 speakers drop out of the TWS mode, Host unit keep
connecting with BT devices and keeping play music
3.
Speaker will play the first connected device, the other device
can be playing only pause the first one.
LED Indicator light
Blue BT mode： Flash quickly BT ready to pair
Flash slowly
BT connected successfully
Stay on Playing music
Flash Slowly Pause
White AUX mode： Stay on AUX IN Playing
Flash slowly Pause
Orange USB mode: Stay on USB Play
Flash slowly Pause
Calling coming call Bluelight flash slowly
Battery indicator light : White light
(A).Charging, Flashing from the lowest battery indicator to the
highest.
(1).
Battery at 0-25%,Charging is shown as flashing water from the
leftmost lamp to the right.
(2).
Battery at 25-50%,The charging display shows that the leftmost
light is long, the n the water is flashing to the right.
(3).
Battery at 50-75%,The charging display shows that the two left
lights are long, then the water is flashing to the right.。
(4).
Battery at 75%-99%,The charging display shows that the leftmost
three lights are on and the rightmost LED is blinking.。
(5).Fully Charged: all battery indicator light on.
(B).
Speaker on without charging, indicator light stay on for function.
Low battery requirement：
When battery is low，Speaker will send out low battery alarm
beep, one beep each 15S, speaker will turn off after 3 beeps.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Aiwa SB-X120 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Aiwa SB-X120 in the language / languages: English as an attachment in your email.
The manual is 14.95 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
