496631
16
Zoom out
Zoom in
Previous page
1/42
Next page
16
ENGLISH
DVDs:
Playback starts automatically .
If the menu is displayed, see “USING THE MENU”, below .
To switch the number between title and chapter , press
SHIFT+TITLE/CHP. With each press, title or chapter is
displayed alternately .
Audio CDs function:
6
If playback does not start automatically, press c
to start playback.
To play back DVDs recorded in Dolby Digital or DTS sound
See section “SURROUND PLA YBACK” (pages 24-26).
To play back an MP3 disc
Menu screen (SMAR T NAVI) appears on the TV screen after the
disc is loaded.
1. Press i,k,j or l to select PLA Y MODE.
SHIFT+PRGM, RANDOM or REPEAT is also available.
For the programed playback, see page 20.
2. Press i,k,j or l to select the folder and press ENTER.
3. Press i,k,j or l to select the file.
4. Press c to start playback.
When the play mode is program, the program file is added
each time c is pressed. To start playback, press s and then
press c.
0-9 is also available to select the file up to 2 digit number .
The file with
cannot be played back since it cannot be read
properly .
NOTE
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the slot.
Do not place more than one disc.
Do not tilt the unit with disc loaded. Doing so may cause
malfunctions.
USING THE MENU
DVDs with the menu function may automatically display the menu
screen when the disc is loaded. Operate the menu as follows.
DVDs
1
Press i, k, j, or l to select your desired
program.
2
Press ENTER to begin playback.
To manually display the menu
Press MENU or TOP MENU during playback or stop.
NOTE
The disc continues to spin as long as the menu is displayed.
The contents and operation of the software specific menu vary
with the disc. Follow the instructions on the disc and on the
menu screen.
STOPPING AND PAUSING
To stop playback
Press s.
Playback stops. For DVDs, “RESUME” appears and the unit
remembers the point at which playback stopped.
To resume playback from the point where it stopped (DVD
only)
Press c.
Playback starts where it last stopped (Resume function).
To clear the point to be resumed (DVD only)
Press s again during stop.
“ST OP” appears in the TV display . The resume memory is cleared,
and playback starts at the beginning of the disc when c is
pressed.
Last scene function (DVD only)
If the disc is taken out or s is pressed to clear the resume
memory , resume function is still ef fective (up to 7 discs). Next
time the disc is loaded, “PRESS PLA Y TO RESUME PLAY”
appears on the TV screen. To resume playback, press c while
the message is displayed. If a new disc is loaded when the
memory is full, the resume data for the oldest disc is erased.
Last screen function may not work with some discs.
To pause playback
Press a.
To resume playback, press c.
NOTE
DVD playback is resumed with the subtitle and audio language
setting at the time it was stopped, regardless of possible later
changes.
During stop of MP3 disc or resume of DVD, the disc is still
spinning.
Total number of tracks
Title number
Elapsed time of current title
Total playing time
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa HT-DV90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa HT-DV90 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info