Manual Aiwa HT-DV90 (page 3 of 42) (English, French, Spanish)

496631

Zoom out

Zoom in

1/42

ENGLISH

Electric Power

Power Sources - This unit should be operated only from the

type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your

appliance dealer or local power company . To operate unit on

battery power , or other sources, refer to the operating instructions.

Grounding or Polarization - This unit is provided with a polarized

alternating-current line plug (a plug having one blade wider than

the other). This plug will fit into the power outlet only one way .

This is a safety feature. If you are unable to insert the plug fully

into the outlet, try reversing the plug. If the plug should still fail to

fit, contact your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

Power-Cord Protection - This unit is provided with an attachment

plug having overload protection. This is a safety feature. See

operating instructions for replacement or resetting of protective

device. If replacement of the plug is required, be sure the service

technician has used a replacement plug specified by the

manufacturer that has the same overload protection as the

original plug.

Overloading - Do not allow anything to rest on the power cord.

Do not overload wall outlets and extension cords as this can

result in fire or electric shock. Do not locate this unit where the

cord will be abused by persons walking on it.

Outdoor Antenna

Power lines - An outside antenna system should not be located

in the vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or circuits.

When installing an outside antenna system, extreme care should

be taken to keep from touching such power lines or circuits as

contact with them might be fatal.

Outdoor Antenna Grounding - If an outside antenna or cable

system is connected to the unit, be sure the antenna or cable

system is grounded so as to provide some protection against

voltage surges and built-up static charges. Section 810 of the

National Electrical Code, ANSI/NFPA No.70, provides information

with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements for

the grounding electrode. See the figure.

Lightning

For added protection for this unit receiver during a lightning storm,

or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the unit due to lightning and

powerline surges.

Maintenance

Cleaning - Unplug this unit from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth

for cleaning.

Damage Requiring Service

Unplug this unit from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

1) When the power cord or plug is damaged or frayed.

2) If the liquid has been spilled into the unit.

3) If the unit has been exposed to rain or water.

4) If the unit does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions as improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified

technician to restore the unit to normal operation.

5) If the unit has been dropped or the cabinet has been

damaged.

6) When the unit exhibits a distinct change in performance

- this indicates a need for service.

Do not attempt to service this unit yourself as opening or removing

covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

Replacement Parts - When replacement parts are required, be

sure the service technician has used replacement parts specified

by the manufacturer or having the same characteristics as the

original part. Unauthorized substitutions may result in fire, electric

shock or other hazards.

Safety Check - Upon the completion of any service or repairs to

this unit, ask the service technician to perform safety checks to

determine that the unit is in proper operating condition.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa HT-DV90 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Aiwa HT-DV90 Manual

Product: