794113

Aiwa APA700 Manual

5
Zoom out
Zoom in
Previous page
1/5
Next page
INSTALLING & REMOVING UV-C BULB
1. Turn off and unplug unit.
Press the lock and release
button and remove the
rear cover from the unit.
2. Remove the
combination filter. 3. Use a Philips head
screwdriver to remove
2 screws and detach the
UV-C Metal Shield.
UV Bulb Replacement Indicator: The UV light on the display will flash when its time
to replace the UV bulb.
4. The UV-C Bulb is removed by carefully grasping the bulb with a clean cloth or tissue and pulling
the bulb straight out of the unit.
5. The UV-C Bulb is reinstalled by sliding it, horizontally, back into the slots at the top of the unit.
Bulb is NOT visible
until the UV-C METAL
SHIELD has been
removed.
TROUBLESHOOTING GUIDE
PROBLEM SOLUTION
Unit does not operate. Check that the unit is plugged in.
Check that filter is in place.
Confirm that filter is Genuine Replacement Filter
Call Customer Service.
Unit shuts off unexpectedly. Check that unit is plugged into a working electrical outlet.
Check that filter is firmly in place.
Check that the Rear Cover is latched firmly in place.
Call Customer Service.
No air circulating from unit. Unplug unit. Check Pre-/Carbon and filters.
Clean Pre-/Carbon Filter if necessary.
Replace filter if necessary.
Increase in noise level. Make sure the filters are clean. Replace if necessary.
Toshut off the "beeping" sound when buttons are pushed.
1. Press and hold the TIMER and UV buttons for 3 seconds.
Control buttons "beep"
when pushed.
2. Select ON/OFF.
‘Beeping’ will automatically be reset to ON when the
unit is unplugged.
Red light is flashing. Replace filter and reset system.
Blue ring on product Replace bulb and reset system.
is flashing.
NOTE: Do NOT stick any foreign objects or your fingers inside of the unit.
CAUTION: Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in
the unit while cleaning as they will damage the product.
NEVER use alcohol or other solvents.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aiwa APA700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aiwa APA700 in the language / languages: English as an attachment in your email.

The manual is 1.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info