574674
8
Zoom out
Zoom in
Previous page
1/10
Next page
will be on.
SETTING THE TIMER
There are four timers that can be selected on
the remote control.Two daily timers (designated
as T1,T2) ,and two optional weekend timers
(designated as WKTI, WKT2) .Each timer can be
selected by pressing TIMER button.
The daily timers T1 and T2 can be set for ON and
OFF separately for two different time periods.
Timer setting will not change until new setting is
input.
The weekend timers WKT1 and WKT2 can be
set for ON and OFF separately for two different
time periods and they are effective two days
only. These timers will be effective on the day of
setting and on the day after only.
At 24:00 on the second day, the WK timer will not
be effective anymore and the daily timer will be
effective again.
WKTI - effective on the setting day
WKT2 - effective one day after the setting day.
NOTE:
1. During the weekend timer operation, the
daily timers will be disabled.
2. The WK timers must be reactivated before
every weekend.
A) HOW TO SET THE ON TIME
1. Press the TIMER button
to select the desired
timer.
2. Press the SET button till
the ON sign blinks.
3. Press the + or - (HOUR)
button until the desired
value is displayed.
4. Press the SET button to
activate the timer.
B) HOW TO SET THE OFF TIME
1. Press the TIMER button to select the desired
timer.
2. Press the SET button till the OFF sign blinks.
7
I FEEL TEMP FUNCTION OPERATION
Press button IFEEL to activate the IFEEL
function. Thermometer sign will appear on the
LCD operation display . Select suitable
temperature setting. Make sure that the remote
control unit is aimed at the air conditioner, with
the IFEEL sensor in front. Prevent the IFEEL
sensor from being affected by heat sources such
as lamps, heaters, direct sun, etc. or from being
directly affected by the air conditioner air flow.
These may cause the sensor to transmit the
wrong temperature data, thereby disturbing the
performance of the IFEEL function.
ROOM TEMP FUNCTION OPERATION
Press the ROOM button to show the actual room
temperature around the remote control unit.
The measured room temperature and the room
temperature sign will be displayed.
To cancel the ROOM Temperature display press
on one of the following:
Press again on ROOM Temperature button.
Change of MODE button.
OPERATION
OPERATION
NOTE
Room temperature range is between 6 and 36
in 1 increments. Display should show "HI" or
"LO" to represent temperature that is above
36 or below 6.
LOCK FUNCTION
By pressing LOCK button, the remote control
will lock the last operation program. All the
function buttons will be inoperative, including
START/STOP button. By pressing LOCK button
again the remote control will be released from its
locked position. When lock mode is functioning,
the transmission sign
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airwell RC7 remote control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airwell RC7 remote control in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Airwell RC7 remote control

Airwell RC7 remote control User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info