727484
14
Zoom out
Zoom in
Previous page
1/18
Next page
- - 13 - -
Adding and Draining Water
Adding water
The condensing water is recycled to improve efficiency through
cooling condenser. Also it will lower the noise and save energy.
When the condensing water is not enough for pumping, the water
Injection indicator on the control panel will illuminate, you’d better
inject some water into the water draw, right of the handle, there is
a cover. Meanwhile, pay attention the water level pole at your
right, where show the water quantity.
Note: The water-cool-mode is not working under
dehumidifying, fan or heating mode. Do not add water.
Drainage
When the water is full, the water full indicator will light and the
compressor will stop working. The buzzer will buzz 10 times every
5 minutes until the water is below the high level or drained by hand.
When the alarm stops the unit will work automatically.
Before you drain the water you need to turn the unit off and pull
the plug out of the power supply. Upcap the lid, remove the rubber
plug on the drainage port, then let the water flow out. Once drained,
put the rubber plug back and screw the lid up an switch it on.
(Fig.14). If the provided pipe is not long enough, you may buy a
longer one (inner diameters 9mn).
Note
Move the unit gently when the water is high. If not, the water may
spill all inside of the unit.
Plug
Drainage Port
Cover
Lid
Fig 13
Water Draw
Clean Water
Water Level
Small Cover
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airlux YPH-12H -S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airlux YPH-12H -S1 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info