554597
7
Zoom out
Zoom in
Previous page
1/7
Next page
Users and cable management
Users may themselves sometimes want to change some
aspect of the wiring of their Ahrend Portal workstation.
For example plug an item of equipment into a socket or
unplug it, or conceal surplus lengths of cable tidily.
Safety
Safety must be the prime concern in the wiring of a work-
station. For this reason, every component that comes into
contact with wires and cables has rounded edges and the
item of furniture can be earthed as a whole.
Accidents caused by tripping over cables and exes on the
oor can be prevented by concealing the cables in the
facilities specically provided by the Ahrend Portal range.
Concealed cables make the workstation safer, it looks
much tidier and it is easier to clean.
Connections
Your workstation can be tted with connections to the
power supply and to computer networks in a cable dump
suspended under the workstation (g. 8). The workstation
hardware is plugged into sockets in these dumps, and you
can also conceal excess cable in them.
Hinged cable dumps
Cable dumps provide space in which
the excess length of equipment
and power cables can be tidily
concealed.
It may sometimes be necessary to
wheel a mobile drawer pedestal out
of the way rst.
For ease of access to the cables in
them these dumps can be opened
on two sides. Release the two
sliding handles at one sides of the
cable dump and open it carefully
English
Maintenance
These instructions for maintenance are intended for both
the professional cleaner and the user of the workstation.
Never use benzine, acetone, turpentine, petrol or other
aggressive substances, solvents or abrasive cleansers.
Service
We advise you to contact your supplier when moving of-
ces or reconguring the workstation.
Cleaning work surfaces
Normal stains (coffee, tea, pencil,
lipstick, nger marks, grease, water
soluble glue, felt tip pen ink etc.)
can be removed with a clean, damp
cloth. If necessary, a little soft soap
may be added to the water and a
soft nylon brush may be used to
treat more stubborn stains.
Solvent-based lacquer, glue, nail
varnish, ballpoint pen ink etc.
should be removed with an organic
solvent, such as methylated spirits.
Cleaning veneered work surfaces
Wipe with a clean, damp cloth if
necessary. A little soft soap may be
added to the water to treat more
stubborn stains.
Cleaning enamelled metal parts
All coloured metal parts may be
cleaned with a soft cloth, damp-
ened if necessary. More stubborn
stains caused by glue, felt tip pens,
ballpoints etc. are best treated with
lukewarm water and a little soft
soap. Methylated spirit may be used
if necessary.
by hinging.
After the necessary changes have
been made, the cable dump is
closed again by pressing it up and
then x it by sliding both knobs in
the appropiate openings.
3
8
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ahrend Portal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ahrend Portal in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info