474232

AGFEO ST40IP Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
System Telephone
ST 40 IP
5
Connection
Connect the RJ 45 plug of the line cord of your ST 40 IP into a network socket which is connected to
your network. Please note that the LAN module 508 / 510 must be part of this network.
- Insert the RJ 45 plug into the socket until you hear a positive click.
- To release the plug, press the release latch on the plug and at the same time pull out the cable
from the socket (use a small screw driver if required).
Registration
Display Position
Your Display can be adjusted to 6 different viewing angles.
- Please wait until „ASIP Timeout“ is displayed.
- Press and hold the „SET“ button for at least 4 seconds.
- Allocate a unique IoP name to your ST 40 IP:
- Select „Name“ and press „edit“.
- Enter the required name for the ST 40 IP. By using „clear“ you can delete single letters or the
complete name. „Store“ will save the name entered.
Enter the way in which the telephone should receive the IP address:
- Select „DHCP“ and press „edit“.
- Select if your telephone should receive the IP address automatically („Client“), or if
you want to allocate a permanent IP address („Static“).
- If you selected „Static“, then enter the IP address, the Subnetmask („Mask“) and the
Standard Gateway („GWay“).
- Under „Server“ enter the IP address of your LAN module 508 / 510 .
- To enable/disable compression, select „Comp“ and press „edit“.
- Press „Reboot“. The telephone will be restarted and will register to the LAN module.
- Start the programming of the LAN module and activate the telephone:
- Allocate an extension number to your ST 40 IP:
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AGFEO ST40IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AGFEO ST40IP in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AGFEO ST40IP

AGFEO ST40IP User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info