474230
2
Zoom out
Zoom in
Previous page
1/20
Next page
Safety Notice
- Do not work on the extension wiring or connect/disconnect the ST 31during a thunder storm.
- Install extension wiring of the ST 31in a manner that it is not walked on or causing anybody to trip
over them.
- Ensure that no liquids are allowed to enter the housing of the ST 31Digital System Phone as
otherwise short circuiting may result.
The digital System Phone ST 31 is intended for the connection to an internal S0-Bus of an AGFEO
ISDN Telephone System. The ST 31 may be connected to the following AGFEO ISDN Telephone
Systems:
- AS 151, AS 181, AS 1x, AS 2x from Firmware 6.3
- AS 151 plus, AS 181 plus, AS 181 plus EIB-In-One from Firmware 8.0
- AS 281 All-In-One, AS 35, AS 35 All-In-One from Firmware 7.6
- AS 40 P (P400-1), AS 4000 (P400-1), AS 100 IT (P400 IT), AS 43, AS 45, AS 200 IT fromFirmware 7.6
- all other AGFEO Telephone Systems with a Firmware below 7.1 will emulate the ST 31 as an ST 30
System Phone. Please refer to Page 18 for a description of function changes.
The AGFEO ST 31 System Phone will have a max. power consumption of 1.7 Watt when under full
load, such like all LED’s are lit, optional answering machine module A-40 installed and the phone
ringing at full volume. The max. output for a S0 540 (S0440) module is 4.5 Watt for each two ports
combined. This would mean that in the worst case scenario two ST 31’s and one ST 30 (max. 1.3
Watt) could exceed the maximum limit set. This could activate the overload protection circuit and
shut down the power supply to the relevant combined ports. (System Phones none functional / S0
Bus no power. Power will be restored after system reset) In such eventualities it is suggested to
connect an external power source to the ISDN Bus.
A power supply unit may be obtained from your distributor, AGFEO Ref. No. 1542431. (Identical to
STE 30 / DECT S0 Base Power Supply Unit)
Information regarding software upgrades are available via your dealer.
AGFEO will not accept any liability for damages which may result from improper use of the digital
System Phone ST 31.
User Instructions
This User Manual is valid for the current system firmware available at the time. However, the ST 31
System Phone is controlled from the Telephone System, which means that if the system firmware
is changed, then some sections in this manual may become invalid.
This manual contains user instructions for the ST 31 and a brief instruction regarding the system
features. A detailed description of features relating to the Telephone System can be found in the
accompanying user guide delivered with the Telephone System.
About this User Guide
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AGFEO ST31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AGFEO ST31 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AGFEO ST31

AGFEO ST31 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info