68062
2
Zoom out
Zoom in
Previous page
1/20
Next page
Sicherheitshinweise
- Während eines Gewitters dürfen Sie die Anschlußleitung des ST 31 nicht anschließen und nicht
lösen.
- Verlegen Sie die Anschlußleitung des ST 31 so, daß niemand darauf treten oder stolpern kann.
- Achten Sie darauf, daß keine Flüssigkeit ins Innere des digitalen Systemtelefons gelangt. Kurz-
schlüsse können die Folge sein.
Über dieses Handbuch
Dieses Handbuch ist gültig für die zum Auslieferungszeitpunkt aktuelle Anlagen-Firmware. Da das
ST 31 über die Anlage gesteuert wird, können im Falle eines Firmwareupgrades der Anlage manche
Teile des Handbuchs ungültig werden.
In diesem Handbuch ist die Bedienung des ST 31 und die Bedienung der Leistungsmerkmale Ihrer
AGFEO ISDN-TK-Anlage in kurzer Form erklärt. Ausführliche Erklärungen zu den Leistungsmerk-
malen finden Sie in der Bedienungsanleitung Ihrer TK-Anlage.
Das digitale Systemtelefon ST 31 ist zum Anschluß an einen internen S0-Bus einer AGFEO
ISDN-Telekommunikationsanlage bestimmt.
Das ST 31 können Sie an folgende AGFEO ISDN-Telekommunikationsanlagen anschließen:
- AS 151, AS 181, AS 1x, AS 2x ab Firmware 6.3
- AS 151 plus, AS 181 plus, AS 181 plus EIB ab Firmware 8.1
- AS 281 All-In-One, AS 35, AS 35 All-In-One ab Firmware 7.6
- AS 40 P (P400-1), AS 4000 (P400-1), AS 100 IT (P400 IT), AS 43, AS 45, AS 200 IT ab Firmware 7.6
- TK-HomeServer ab Firmware 2.108
- an allen weiteren, nicht aufgelisteten AGFEO Telekommunikationsanlagen mit internem S0-Bus
wird das ST 31 im Emulationsmodus als ST 30 erkannt. Beachten Sie dabei bitte die auf Seite 18
beschriebenen Bedienungsänderungen.
Bitte beachten Sie bei der Anschaltung auf einem internen SO-Bus, dass Sie aufgrund der höhe-
ren Leistungsaufnahme der AGFEO ST 31 und der vorliegenden, physikalischen Leistungsgrenze
der im Markt befindlichen AS 40P (P400-1), AS 4000 (P400-1) und AS 100 IT (P400 IT) ggfs. zusätzli-
che Netzteile einsetzen müssen !
Da ein ST 31 eine max. Leistungsaufnahme von 1,7 Watt aufweist (alle LEDs an, A-Modul 40 ge-
steckt, aktiver Ruf, Ruflautstärke max.) und die Absicherung eines S0-Moduls 440 immer pro
Doppelport passiert (4,5 Watt), ist diese Grenze bei einer Belastung von 2 Stück ST 31 und 1 Stück
ST 30 (P max. 1,3 Watt) im "Worst Case Fall" schon überschritten.
Im Fehlerfall würde die Anlage für den relevanten Doppelport eine Schutzabschaltung vornehmen
(Systels/ISDN Bus ohne Funktion, nach einem Reset der Anlage wird der Doppelport von der Anlage
wieder freigeschaltet) !
In dieser beschriebenen Konstellation (o.ä.) sollten Sie ein Netzteil vorsehen um den "Worst Case
Fall" damit abzufangen !
Zu beziehen sind diese Netzteile bei Ihrem Großhändler unter der AGFEO Artikelnummer 1542431
(baugleich mit dem Netzteil STE 30 / DECT S0 Basis) !
Über Software-Upgrades informiert Sie Ihr Fachhändler.
Eine Haftung der AGFEO GmbH & Co. KG für Schäden aus nicht bestimmungsgemäßem Gebrauch
des digitalen Systemtelefons ST 31 ist ausgeschlossen.
Gebrauchsbestimmungen
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AGFEO ST 31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AGFEO ST 31 in the language / languages: German as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info