603853
4
Zoom out
Zoom in
Previous page
1/96
Next page
4www.aeg.com
4. CONTROLS
5. LIGHTING
Button Function Display
ATurns the suction motor on and off at speed one. Displays the set speed
Press and hold the button for approximately 5 seconds, with all
the loads turned off (Motor and Lights), to turn the Remote Control
On and Off.
IR+Dot (2 ashes)–Alarm On.
IR+Dot (1 ash)–Alarm Off.
BDecreases the working speed. Displays the set speed
CIncreases the working speed. Displays the set speed
D
Activates intensive speed from any other speed, including
motor off. This speed is set to operate for 5 minutes, after
which the system returns to the speed that was set before.
Suitable to deal with maximum levels of cooking fumes.
Displays HI and the time remaining
once every second.
When the lters alarm is triggered, the alarm can be reset
by pressing and holding this button for approximately 3
seconds. These indications are only visible when the motor
is turned off.
F indicates the need to wash the
metal grease lters. The alarm is
triggered after the Hood has been in
operation for 100 working hours.
C indicates the need to change the
activated charcoal lters, and also to
wash the metal grease lters. The
alarm is triggered after the Hood has
been in operation for 200 working
hours.
E
Delay function
Activates automatic switch-off with a 20’ delay. Suitable to
complete elimination of residual odours. Can be activated
from any position, and is disabled by pressing the button or
turning the motor off.
Displays the operating speed and the
dot at the bottom right ashes alterna-
tely with the remaining time.
Press and hold the button for approximately 5 seconds,
with all the loads turned off (Motor and Lights), to turn the
Activated Charcoal Filter alarm On and Off.
- C ashes twice - A.C. Filter alarm
Activated.
- C ashes once - A.C. Filter alarm
Deactivated
FTurns the lighting system on and off at maximum intensity.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG X79263MK10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG X79263MK10 in the language / languages: French as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info