463269
5
Zoom out
Zoom in
Previous page
1/57
Next page
ENGLISH 5 WS 650-115, WS 715-115, WS 715-125, WSE 800-125
Electronics
The speed of rotation is adjusted electronically when the load increases.
Under the effect of extreme electromagnetic interferences from the outside, tempo-
rary variations in the speed of rotation could arise in particular cases.
Speed selection Speed pre-selection with the setting wheel:
A= lowest speed
G= highest speed
Mounting the
protective cap
Push the protective cap over the spindle as shown
in illustration.
Turn the protective cap until the tension spring
locks into place behind the fence. The protective
cap can be rotated between the two fences.
To remove the protective cap lift the tension
spring slightly with aid of a screwdriver and com-
pletely turn it. Pull the protective cap off the spin-
dle.
Fitting the
working tool
Always disconnect the plug from the socket before carrying out any work on the ma-
chine.
Lock the work spindle by depressing the spindle
lock. Mount the tension flange, the working tool,
and the adjusting nut as shown in illustration.
FIXTEC quick-
action adjusting
nut
Only tighten and loosen the FIXTEC quick-action adjusting nut by hand. Do not use
any tools!
Insure that the hoop of the FIXTEC quick-action adjusting nut is only placed in the
upward position for tightening/loosening.
Adjusting nut Loosen respectively tighten the djusting nut with a pin-type face spanner.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG WS 715-115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG WS 715-115 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info