Manual AEG SB2E 760 R (page 2 of 84) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

463191

Zoom out

Zoom in

1/84

ENGLISH

SBE 600 R, SB2E 680 R, SB2-700, SB2E 700 R, SB2E 700 RS, SB2E 705 PLUS, SB2E 750 R, SB2E 760 R

You have high standards and expect to purchase quality goods – quality offered by

Atlas Copco.

We have built a durable and reliable electric power tool for you.

Please read the instructions for use before first operation so you can handle your

power tool effectively and safely.

We are sure that buying an AEG Electric Power Tool from Atlas Copco was the right

choice!

SBE 600 R SB2E 680 R SB2–700

Nominal power 600 W 705 W 700 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

No-load speed 0–3100 min

-1

. . . . . . . . . . . . .

1st gear 0–1350 min

-1

1500 min

-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2nd gear 0–3200 min

-1

3600 min

-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Percussion rate 49600 min

-1

51200 min

-1

51200 min

-1

. . . . . . . . . . . . . . . . . . .

Drilling capacity in

Concrete 20 mm 20 mm 20 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Brick and tile 20 mm 24 mm 24 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Steel 13 mm 13 mm 13 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wood 35 mm 40 mm 40 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Drill opening range 1,5-13 mm 1,5-13 mm 1,5–13 mm. . . . . . . . . . . . . . . . . .

Drive shank 1/2”x20 1/2”x20 1/2”x20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chuck neck diameter 43 mm 43 mm 43 mm. . . . . . . . . . . . . . . . . . . . . . . . . .

Weight 1,9 kg 2,2 kg 2,2 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SB2E 700 R SB2E 750 R SB2E 760 R

SB2E 700 RS

SB2E 705 PLUS

Nominal power 705 W 750 W 760 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

No-load speed

1st gear 0–1350 min

-1

0–1350 min

-1

0–1350 min

-1

. . . . . . . . . . . . . . . . . . . . .

2nd gear 0–3200 min

-1

0–3200 min

-1

0–3200 min

-1

. . . . . . . . . . . . . . . . . . . . .

Percussion rate 51200 min

-1

51200 min

-1

51200 min

-1

. . . . . . . . . . . . . . . . . . .

Drilling capacity in

Concrete 20 mm 20 mm 20 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Brick and tile 24 mm 24 mm 24 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Steel 13 mm 13 mm 13 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wood 40 mm 40 mm 40 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Drill opening range 1,5–13 mm 1,5–13 mm 1,5-13 mm. . . . . . . . . . . . . . . .

Drive shank 1/2”x20 1/2”x20 1/2”x20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chuck neck diameter 43 mm 43 mm 43 mm. . . . . . . . . . . . . . . . . . . . . . . . . .

Weight 2,5 kg 2,5 kg 2,5 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

J Please pay attention to the safety instructions in the attached leaflet!

J Dust that arises when working on material containing asbestos or stonework

containing crystalline silicic acid is harmful to the health. Please follow accident

prevention regulations.

J Appliances used at many different locations including open air must be connected

via a current surge preventing switch.

J Always wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

J Sawdust and splinters must not be removed while the machine is running.

J Do not pierce the motor housing as this could damage the double insulation (use

adhesives).

J Always disconnect the plug from the socket before carrying out any work on the

machine.

Only plug-in when machine is switched off.

J Keep mains lead clear from working range of the machine. Always lead the cable

away behind you.

J Always use the auxiliary handle, even if the machine has a safety clutch since this

safety clutch only engages when the machine blocks with a jerk.

J Do not use diamond core drills on hammer mode.

J When drilling in walls ceiling, or floor, take care to avoid electric cables and gas or

waterpipes.

Introduction

Technical Data

Advice for your

safety

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG SB2E 760 R in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG SB2E 760 R Manual

Product: