Manual AEG RC 4001 (page 33 of 50) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

480506

Zoom out

Zoom in

1/50

Programming the remote control

The universal remote control o ers two

programming options. Setting via "Code

Search“ and "Learn function“.

"Code Search" function

1. Switch on the device you want to

operate (e.g. TV).

2. Keep the SET button and the

corresponding device selection button

(e.g. TV) simultaneoulsy pressed until

the LED lights up.

3. Activate the search function by

pressing the SET key (22). The LED will

start to  ash. Then keep the POWER

button pressed until the LED starts

to  ash quickly. After releasing the

POWER button, the LED lights up again

continuously. The LED  ashes quickly

at intervals of approx. 3 seconds to

indicate the activated search function.

4. Immediately after the device switches

o , press the device selection button

(e.g. TV). The LED  ashes slowly. To

save the found code, press the device

selection button once again. The LED

goes out.

Note:

Con rmation of the device code must

take place within one second.

5. Check the function of the keys on the

device. If several of the keys do not

function or function incorrectly, repeat

the search.

If this method proves unsuccessful,

use the Learn function to program the

remote control as described below.

Note:

Owing to the numerous di erent brands

on the market, complete programming of

all the functions of your original remote

control cannot be guaranteed.

Learn function

The universal remote control is able to

"learn" the individual key functions of

your original remote control. This function

can be used, e.g. when not all functions

are programmed via the "Code Search"

function.

Note:

• Do not use the following keys for the

Learn function: Light (16), SET (22),

LEARN (13) and Selection keys (2).

• Use new batteries in both remote

controls to ensure trouble-free

programming.

1. Ensure that your original remote control

works perfectly.

2. Place both remote controls on a  at

surface and point both ends that are

normally aimed at the device towards

each other. The distance between both

remote controls should be 2 – 5 cm.

3. Keep the SET button and the

corresponding device selection button

(e.g. TV) simultaneoulsy pressed until

the LED lights up.

4. Press the LEARN key (13).

5. Now press the key on the universal

remote control to be programmed.

6. Press and hold the respective key on the

original remote control until the LED

 ashes 2 times slowly. The programmed

key function is automatically stored.

Note:

• If no button is pressed within

30 seconds, the remote control

switches back to normal mode

• If programming is unsuccessful, the

LED will  ash 5 times rapidly.

• Neon light can in uence

programming.

7. Repeat steps 5 and 6 until all key

functions on the universal remote

control have been programmed.

8. Finally press the LEARN key to leave the

programming mode. The LED goes out.

Backlight

The keypad lighting can be switched on

and o with the light key (16).

When the keypad light is switched on,

the backlight illuminates each time a key

is pressed. This extinguishes after about

5 seconds if no key is pressed within this

time.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AEG RC 4001 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AEG RC 4001 Manual

Product: