470025
18
Zoom out
Zoom in
Previous page
1/20
Next page
Clean the bobbin case
Clean the bobbin case
1. Put the needle in the highest position,
otherwise, it is not possible to remove the
shutter. Remove the bobbin case.
2. Turn the snap lever out and remove the
retaining ring.
3. Remove the shuttle by holding the cone in
the middle of the shuttle. Remove all the
dirty parts from the retaining ring and oil all
the parts using a cloth.
4. Put a few drops of oil onto the shuttle.
5. Put the parts together again in
reversed order.
Warning:
Please only use special oil for
sewing machines!
Clean feed dog
Clean feed dog
To guarantee a perfect sewing it is always
necessary to keep the feed dog clean. You
should clean it every 2-3 months if you use
the machine very often.
1. Remove the presser foot and the needle.
2. Open the screws of the needle plate to
remove them from the machine (figure 1).
3. Now, remove the dust and remnants from
the feed dog by using a small brush
(figure 2).
4. Put on the needle plate again.
17
Bobbin
Shuttle
Greifer-
bahnring
Bobbin
case
Bedienungsanl.1800/1600 GB 30.08.2004 17:45 Uhr Seite 19
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG NM 1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG NM 1600 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info