463136
2
Zoom out
Zoom in
Previous page
1/57
Next page
1
ENGLISH
MDE 1200
You have high standards and expect to purchase quality goods – quality offered by
AEG. We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely. We are sure that buying an Electric Power Tool
from AEG was the right choice!
Nominal power consumption of the
driving motor 1200 W. . . . . . . . . . . . . . . . . . . . . . . . .
Power consumption of the magnet 50 W. . . . . . . . .
No-load speed 300–640 min
-1
. . . . . . . . . . . . . . . . . . . .
Speed under load max. 170–330 min
-1
. . . . . . . . . . . . .
Stroke 120 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stand height min. 410 mm. . . . . . . . . . . . . . . . . . . . . .
Stand height max.
(carriage in top position) 530 mm. . . . . . . . . . . . . . . .
Size of magnetic foot 160x80 mm. . . . . . . . . . . . . . . .
Max. magnetic power 10 kN. . . . . . . . . . . . . . . . . . . . .
Drill diameter max. with core hole drill bit 42 mm. . .
Material thickness max. 50 mm. . . . . . . . . . . . . . . . . .
Spindle receiver 1/2”x20 Gg. . . . . . . . . . . . . . . . .
Weight 10 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The data stated above apply for models with 230 – 240 V.
In case of deviating mains voltage, the data stated on the rating plate are
applicable.
J Please pay attention to the safety instructions in the attached leaflet!
J Always use the protective shields on the machine.
J Always wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
J Sawdust and splinters must not be removed while the machine is running.
J Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
J Always disconnect the plug from the socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
J Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
J Secure the magnetic drill stand with the provided chain when working slanting or
vertical surfaces, or overhead such that it won’t fall down in case of power loss.
J The maximum retaining power is reached when using steel with a low carbon
content and a material thickness of at least 12 mm.
J Do not expose the drill stand to rain and do not use in damp or non–flameproof
rooms.
Typically the A-weighted sound pressure level of the tool is 83 dB (A).
The noise level when working can exceed 85 dB (A).
Wear ear protectors! Measured values determined according to EN 50 144.
Typically the hand-arm vibration is below 2.5 m/s
2
.
Measured values determined according to EN 50 144.
The drill stand is suited for drilling large holes in steel and other ferroginous metals.
It is possible to use the magnetic drill stand while arc–welding.
Do not use this product in another way as stated for normal use.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Use
Mains
connection
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG MDE 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG MDE 1200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info