480520

AEG IMS 4441 iP Manual

32
Zoom out
Zoom in
Previous page
1/34
Next page
English
32
SLEEP (2)
When the device is switched on, you can set the time after
whichthedevicewillturnintostandbymode;setthetimein
10minutesintervalsfrom90to10minutes.Repeatedlypress
this button until the display shows the desired time. When
the function is activated, the display will show the symbol
“ ”.The device will turn off automatically after the preset
time.
To deactivate the function, press the SLEEP button until OFF
is shown on the display.
ALARM (6)
Youcansettheunitsothatitswitchesonatacertaintime.
1. UseI/ button to switch into standby mode (time will be
displayed).
2. KeeptheALARMbuttonpresseduntilthehoursandthe
“ ” symbol flash.
• Usingthe / TUNING/SKIP / buttons (13), you
can now set the turn-on hours, turn-on minutes and
turn-on mode in turn.
• Settheturn-onvolumewiththeV�LUME+/-but-
tons.
• ConrmyourinputeachtimewiththeALARM
button. The current display to be set flashes on the
display.
3. Afteryouhaveselectedtheturn-onvolume,pressthe
ALARMbuttonagain.“ ” will be displayed and the
timer is activated.
Afterthesettimehasbeenreached,thedeviceswitchesto
the selected mode.
• UsetheI/ andALARMbuttonstoturnoffthefunction
untilthenextday.The“ ” symbol continues to be
shown on the display.
• Todeactivatethetimer,presstheALARMbuttonagain.
“ ” will disappear from the display.
• Snooze function
UsetheMEM/CLK-ADJ./SN��ZEbutton(5and12on
the unit) to turn off the automatic preset timer function for
approx.9minutes.“SN��ZE”appearsonthedisplay.
MEM/CLK-ADJ. / SNOOZE (5)
Set the clock, store stations and program playback.
Program Playback
Program playback in desired sequence. (Only in CD mode)
1. Drücken Sie die / ST/MO Taste (4).
2. PressiP�D/MEM/CLK-ADJ.button(5).Thedisplaywill
show “P01 T001” (“memory position” “Title”) and MEM
Usethebuttons / TUNING/SKIP / (13) to select
thedesiredtrackandpressiP�D/MEM/C-ADJ.button
again. The display will change to memory position P02.
3. Usethe / TUNING/SKIP / buttons to select the
nexttrackandpressiP�D/MEM/CLK-ADJ.again.Repeat
the steps until you have selected all tracks.
4. Press the /AUT�MEMbutton(3).Playbackstarts.
The display will show the first selected track number.
5. Press / ST/MO button once to stop playback. The
memory will be kept.
6. To play the program again, press the /AUT�MEM
button.
7. To delete memory, please press / ST/MO button twice.
The MEM display switches off.
The unit does not stop automatically after all programmed
titles have been played. The program sequence will be kept
in the memory until you switch to another mode, remove the
CD from the compartment or switch off the device.
Playback of music files in MP3 format
This device allows the playback of music files in MP3 format.
The device furthermore supports the common CD types: CD,
CD-RW,andCD-R.
YourdevicecanplayMP3CDs.ThesearecompressedCDs
thatcanstoreupto200tracks.Yourdeviceautomatically
recognizes MP3 discs (the display will show total number of
tracks and folders). Please refer to chapter “Playing CD/MP3”
forplaybackofsuchCDs.Youmayprogramtracksasalready
described under “Program playback”.
Please note:
There are many burning and compressing methods, as well
as differences in quality of CDs and burnt CDs.
Furthermore,themusicindustrydoesnotapplyxedstan-
dards (copy protection).
For that reason there might, in rare cases, occur problems
when playing CDs and MP3 discs. That is not a malfunction
of this device.
Cleaning and maintenance
• Disconnectthemainsplugbeforecleaning.
• Youmaywipeoffexternalstains,usingaslightlydamp
cloth without any additives.
Trouble shooting
Problem Cause Solution
The unit cannot be
operated
The unit is blocked
and “hangs”
Pull the mains plug
forapproximately
5 seconds. Then
connect the unit
again
… 32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG IMS 4441 iP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG IMS 4441 iP in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info