69522
7
Zoom out
Zoom in
Previous page
1/21
Next page
1. Open loading door.
2.
Unscrew hinge A from the front of the
machine and take off the loading door.
3.
Remove cover plates B . To do this, insert
a thin screwdriver into the slots as
shown in the illustration, press down-
wards slightly and pry out the cover
plates.
4.
Use an appropriate tool and exert pressure to unfasten locking block C from the snap-
on fixture, take out and re-insert on the other side having rotated the block through
180°.
5.
Unscrew hinge A from the loading door, rotate through 180°, re-insert on the opposite
side and screw down.
6.
Re-insert cover plates B on the opposite site having first rotated them through 180°.
7.
Unscrew cover plates D from the front
of the machine, rotate through 180°,
screw on the opposite side.
8.
Unscrew door lock E , push down slightly
and remove from the front of the ma-
chine.
9.
Press snap-in button F in and down,
press cover down slightly and remove from front of the machine.
10.
Change door lock E over to the opposite side, screw down the door interlock.
11.
On the other side, insert cover F and allow snap-in button to lock into place.
12. Insert loading door and hinges into recesses on the front of the machine and screw
down.
Note regarding contact protection: The machine is only secure for operations again once
all plastic parts have been inserted.
Special accessories
Stacking kit
These intermediate installation kits can be used to arrange the dryer and a washing
machine (60 cm wide, front loaded) as a space-saving washer/dryer stack. The washing
machine is at the bottom and the dryer is at the top.
Read carefully the instructions supplied with the kit.
Available from your Service Force Centre or your specialist dealer
Draining kit
Installation kit for direct draining of the condensed water into a basin, siphon, gully, etc.
The water reservoir then no longer has to be drained, it must however remain in its
intended position in the machine.
Fixed hose has to be on the suitable height from minimum of 50 cm to maximum of 1
m from floor level and cannot be looped. If possible shorten the draining hose.
Read carefully the instructions supplied with the kit.
Available from your Service Force Centre or your specialist dealer
C
B
B
A
A
E
E
D
D
FF
70
Installation
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG Electrolux Lavatherm 55840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG Electrolux Lavatherm 55840 in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AEG Electrolux Lavatherm 55840

AEG Electrolux Lavatherm 55840 User Manual - English - 88 pages

AEG Electrolux Lavatherm 55840 User Manual - German - 44 pages

AEG Electrolux Lavatherm 55840 Manual - Dutch - 1 pages

AEG Electrolux Lavatherm 55840 User Manual - Dutch - 44 pages

AEG Electrolux Lavatherm 55840 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info