362556
13
Zoom out
Zoom in
Previous page
1/20
Next page
13
DE
GR
En
A) Both power and steam indicator
lights are ashing:
• Checkthattheselectordialisturned
to
.
• Ifsteam/hotwaterhasbeenusedfor
too long, make a pause for 30 seconds.
• Switchthemachineofor5minutes
and restart it. If the lights are still ash-
ing, contact customer support.
B) The espresso temperature is too low:
• Carryoutthebrewingprocedurewith-
out using espresso grounds, but using
the lter and lter holder, in order to
preheat the system.
• Preheatthecups.
• Decalcifytheappliance.
C) The ow speed decreases notice-
ably:
• Donotpresstheespressogroundstoo
rmly into the lter.
• Donotgrindtheespressogroundstoo
nely(“mediumneness).
• Decalcifytheappliance.
D) The espresso is owing out of the
side of the lter holder:
• Ensurethatthelterholderhasbeen
placed correctly.
• Twistthelterholderalittlemore
rmly into the retainer.
• Cleananyespressogroundsaway
from the rim of the lter holder.
E) No espresso is coming out:
• Ifthereisaloudnoisefromthema-
chine, this means air is in the system.
Let hot water ow through the nozzle
until there is a steady ow. Then try
brewing coee again.
• Ensurethatthewatertankhasbeen
lled and is correctly in place.
• Ensurethatthelterholderhasbeen
placed correctly.
• Ensurethattheselectordialhasbeen
turned right to the position.
• Donotpresstheespressogroundstoo
rmly into the lter.
• Cleanthebrewlter.
• Decalcifytheappliance.
F) The crema is no longer being pro-
duced as it should:
• Ensurethatthereareenoughespresso
grounds in the lter.
• Presstheespressogroundslightly.
• Cleanthelter.
G) Too little milk froth is created when
steaming milk:
• Alwaysusecool,fresh,low-fatmilk.
• Cleanthesteamnozzle.
H) The ow increases:
• Theespressogroundshavebeen
ground too rough.
• Ensurethatthereareenoughespresso
grounds in the lter.
I) The coee machine switches itself
o while operating:
• Theappliancepumpisequippedwith
a temperature fuse that protects it
from overheating. The temperature
fuse interrupts the machine’s opera-
tion, if the machine is operated for
too long or if the pump is run without
water.
• Settheselectordialto“0”andremove
the plug from the mains socket.
• Leavethemachinetocoolforatleast
20 minutes. Fill up with water.
• Plugtheapplianceintothemains
again and switch it on. If the appliance
still does not work, please contact our
Customer Care Department.
En
Troubleshooting
ELX12542_Franca_Espresso_Selector_AEG_3lang.indd 13 2009-06-10 10:58:41
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aeg-electrolux ea 250 cremapresso at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aeg-electrolux ea 250 cremapresso in the language / languages: English, German as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info