463076
4
Zoom out
Zoom in
Previous page
1/50
Next page
6
ENGLISH
DB2E 1500, DSB2E 1500
1. Open chuck by turning.
2. Insert the working tool
3. Insert chuck key successively into all 3
holes at the chuck month and tighten
clockwise.
4. Insert the hexagonal end of the key into
the hexagonal hole in the eccentric cam
and rotale clockwise until tight. The chuck
is now locked.
Rotate eccentric cam anticlockwise using
key. Open chuck with toothed end of key.
Always disconnect the plug from the socket before carrying out any work on the
machine.
1. Screw down the SDSplus adapter on the work spindle.
2. Screw down the diamond core cutter on the SDSplus adapter.
3. Pull back metal sleeve of the SDSplus adaptor. Push in centre bit (SDSplus drill
bit) rotating it and let go of metal sleeve.
1
2
Check that the centre bit is bolted properly. It should be movable 5 mm in
longitudinal direction.
The centre bit should surpass the core cutter by at least 5 mm.
Use SDSplus drill bits with a diameter of 8 mm.
Changeover drilling/hammer drilling with
switch
Drilling:
Turn arrow towards handle
Hammer Drilling:
Turn arrow towards
chuck
Fitting the working
tools
Removal of the
working tools
Mounting the
core cutter
(Standard
system)
Switching over
drilling
percussion
drilling
(only applicable
for DSB2E 1500)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DSB2E 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DSB2E 1500 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info