697995
4
Zoom out
Zoom in
Previous page
1/176
Next page
4 www.electrolux.com
systems, thermosiphons, water-heaters, etc.).
When the appliance operates with other appliances the maximum
vacuum generated in the room should not exceed 0.04 mbar.
Make sure not to cause damage to the mains cable. Contact our
Authorised Service Centre or an electrician to change a damaged
mains cable.
If the appliance is connected directly to the power supply, the electri-
cal installation must be equipped with an isolating device that allows
to disconnect the appliance from the mains at all poles. Complete
disconnection must comply with conditions speci ed in the overvol-
tage category III. The means for disconnection must be incorporated
in the xed wiring in accordance with the wiring rules.
• Do not ambé under the appliance.
Do not use to exhaust hazardous or explosive materials and vapours.
Clean the appliance regularly to prevent the deterioration of the
surface material.
Clean the appliance with a soft cloth regularly.
Do not use a steam cleaner, water spray, harsh abrasive cleaners
or sharp metal scrapers to clean the surface of the appliance. Use
only neutral detergents.
• Clean grease lters regularly (at least every 2 months) and remove
grease deposits from the appliance to prevent the risk of re.
Use a cloth or brush to clean the interior of the appliance.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Risk of injury, electric shock, re,
burns or damage to the appliance.
• Only a quali ed person must install this
appliance.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied
with the appliance.
Always take care when moving the ap-
pliance as it is heavy. Always use safety
gloves and enclosed footwear.
• Before installing the appliance remove
all the packaging, the labelling and the
protective lm.
• Do not install the exhaust air into a wall
cavity, unless the cavity is designed for
that purpose.
2.2 Electrical connection
WARNING!
Risk of re and electric shock.
All electrical connections should be made
by a quali ed electrician.
• Make sure that the parameters on the ra-
ting plate are compatible with the electrical
ratings of the mains power supply.
• If the symbol ( ) is not printed on the ra-
ting plate, the appliance must be earthed.
Always use a correctly installed hockproof
socket.
• Do not let the electricity mains cable
tangle.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DKB2630M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DKB2630M in the language / languages: All languages as an attachment in your email.

The manual is 14,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info