560973

AEG DB8060-U Manual

19
Zoom out
Zoom in
Previous page
1/20
Next page
19
D
EL
NL
F
GB
GB
GB
Disposal
Disposal
Packaging materials
The packaging materials are environ-
mentally friendly and can be recycled.
The plastic components are identi ed by
markings, e.g. >PE<, >PS<, etc.
Please dispose the packaging materials
in the appropriate container at the
community waste disposal facilities.
Old appliance
The symbol
on the product or on
its packaging indicates that this product
may not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product
is disposed of correctly, you will help
prevent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product. For more detailed information
about recycling of this product, please
contact your local city o ce, your
household waste disposal service or the
shop where you purchased the product.
Troubleshooting
Problem Possible cause Solution
Soleplate is not heating even though iron is
turned on.
Connection problem Check main power supply cable, plug and
outlet.
Temperature control is in MIN position. Select adequate temperature.
Iron does not produce steam. Not enough water in tank. Fill water tank (see “Getting started”, no 2).
Steam control is selected in non-steam position. Set steam control between positions of
minimum steam and maximum steam (see
“Ironing chart”).
Spray function does not work. Not enough water in tank. Fill water tank (see “Getting started”, no 2).
Steam jet and vertical steam jet function does
not work.
Steam jet function was used very frequently
within a short period.
Put iron on horizontal position and wait
before using steam jet function.
Iron is not hot enough. Adjust the proper temperature to steam
ironing (up to
). Put iron in vertical
position and wait until temperature indicator
light turns o .
Water leaks from the soleplate during ironing. The iron is not hot enough. Set the temperature dial to a temperature
(
to maximum) suitable for steam ironing.
Put the iron on its heel and wait until the light
has gone out before you start ironing.
Flakes and impurities come out of the
soleplate during ironing.
You have used hard water, which has caused
scale  akes to develop in the water tank.
Use the self-clean function one or more times.
Water leaks from the soleplate while the iron is
cooling down or after it has been stored.
The iron has been put in horizontal position
while there is still water in the water tank.
Empty the water tank and set the steam
control to position o before storing the iron.
AEG IFU 5Safety Mahe 19.07.11.indd 19 19.07.11 11:19
… 19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DB8060-U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DB8060-U in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info