474119
91
Zoom out
Zoom in
Previous page
1/96
Next page
91
ENGLISH
Classication settings
Parental Control (Kid safe)
Some DVDs show target group information. This is similar to the movie rating system (e.g. “PG74”).
With activated parental lock function the respective data on the DVD are read (if available) and compared with the
preset value. If the DVD is intended for an older age group than set it cannot be played. Select among the following
rating options:
- Kid Safe: Suitable for children.
- G: Suitable for all age groups.
- PG: Parental guidance is recommended. Some section may be unsuitable for small children.
- PG 13: Parental guidance is strongly recommended. Some section may be unsuitable for children under the age
of 13.
- PGR: Parental guidance is necessary.
- R: Juveniles under the age of 17 should only watch the movie in the company of adults.
- NC17: Children and juveniles under the age of 18 are not permitted to see the movie.
- Adult: Only adults are permitted to watch the movie.
In order to activate the individual parental control options, please proceed as follows:
1. In the “Parental Control” line press the OK button. A window appears for entering the current password.
2. Enter the current password with the Numeric buttons and confirm with the OK button. The master password is
“6666“.
3. Press the OK button again.
4. Now select the desired option and confirm with the OK button.
Set Password
This menu allows you to change the password for the parental lock function.
To change the password rst the current password must be entered. The master password is “6666”.
NOTE:
In case you forget your password the master password deactivates the parental lock.
Change the password as follows:
1. Press the OK button in the field "Set Password".
2. Enter the current password in the field “Old Password” with the numeric buttons on the remote control.
The display shows “XXXX” to prevent unauthorised persons to read the password. Confirm your input with the OK
button.
3. In order to set the new password, press the OK button in the “Set Password” line.
4. Enter the new password in the field “New Password” with the numeric buttons on the remote control. Confirm
your input with the OK button.
5. Re-enter the new password in the field “Confirm PWD”. Press the OK button to confirm..
17. Troubleshooting
Before contacting customer support try to solve the problem with the tips from the following table:
Problem Possible cause and proposal for solution
No image, status LED not on
Check if the mains plug sits properly in the wall outlet.
Check mains power on the wall outlet with a dierent device or connect TV set to
dierent wall outlet.
Check if the signal cables from source devices are properly connected.
Check if the source device is turned on.
Image ickers
Check if the input signal of the source device matches the specications of the TV set.
Check if the PC menu settings match the video output settings of the PC.
Set the values again.
TV set cannot be turned on. Check if the mains plug sits properly in the wall outlet.
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG CTV 2206 LED-DVD-DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG CTV 2206 LED-DVD-DVB-T in the language / languages: English, German, Italian as an attachment in your email.

The manual is 5,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info